Selecting The Stereo Programs; Selecting The Bilingual Programs; Adjusting The Sound Quality; Using The Srs Wow Surround Sound - Toshiba 47WL68A Owner's Manual

Selecting the stereo programs

1
When a stereo program is received, d Stereo appears.
2
Press g to select the stereo/monaural mode. d
Stereo and e Mono appear cyclically on the screen.
Stereo

Selecting the bilingual programs

1
When a bilingual program is received, e Dual appears.
2
Press g to select the sound to be heard. The sound
differs according to the transmission system: NICAM or
German stereo/bilingual broadcast.
Dual 1
Display
NICAM
j Dual 1 Sub I sound
J Dual 2 Sub II sound
e Mono Main sound
Note:
These settings are not stored in the TV memory.

Adjusting the sound quality

1
Press M, then press Y or y to display the SOUND menu.
SOUND
MTS
Dual
Headphone
Headphone level
Bass
Treble
MENU Back EXIT
2
Press < or > to select an item you want to adjust, then
press Y or y to adjust the settings as required.
Bass
Selection
Y
Bass weaker
Treble weaker
Balance decreases the right
channel

Using the SRS WOW surround sound

SRS WOW is a special combination of SRS Labs audio
technologies that creates a thrilling surround sound experience
with deep, rich bass from stereo sound sources. Your TV's
audio will sound fuller, richer and wider.
18
Using the TV's features
Sound to be heard
German stereo/
bilingual broadcast
Main sound
Sub sound
—
1/2
Auto
Dual 1
Mode 1
0
0
Watch TV
0
Pressing
y
stronger
stronger
decreases the left
channel
WOW consists of three features; SRS 3D, FOCUS, and
TruBass, being turned on.
1
From the SOUND menu, press < or > to select WOW
on the 2nd page, then press Q.
SOUND
Balance
WOW
Stable sound
Speaker
MENU EXIT
Back
2
Press < or > to select an item you want to adjust, then
press Y or y to adjust the settings as required.
SRS 3D
FOCUS
TruBass
MENU Back EXIT
SRS 3D: To turn the surround effect On or Off.
FOCUS: To turn the vocal emphasis effect On or Off.
TruBass: To select the desired bass expansion level
(Off, Low or High).
Notes:
• If the broadcast is monaural, the SRS 3D effect does not
work.
®
• WOW, SRS and l symbol are trademarks of SRS Labs,
Inc.
• WOW technology is incorporated under license from SRS
Labs, Inc.
• The SRS WOW effect is active only when the sound outputs
from the speaker.

Using the stable sound

The Stable sound function limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in
volume that often happens when a TV program switches to a
commercial).
1
From the SOUND menu, press < or > to select Stable
sound on the 2nd page.
2
Press Y or y to select On or Off.
Note:
The Stable sound effect is active only when the sound outputs
from the speaker.

Activating the speaker

Use this function to turn the TV speakers off when you connect
an audio system (- page 25).
1
From the SOUND menu, press < or > to select
Speaker on the 2nd page.
2
Press Y or y to select On or Off.
2/2
0
OK
Off
On
Watch TV
WOW
Off
On
High
Watch TV