Sound adjustment
Setting the MTS (Multi-channel TV Sound)
- analog only -
Auto mode
The MTS Auto mode automatically recognize stereo/bilingual
programs depending on the broadcast signal.
1�
, then press v or w to display the SOUND
Press
menu then press
.
2�
Press s or r to select MTS, then press
to select Auto or Mono.
Mono mode
If you experience noise or poor reception of any stereo/
bilingual program, set the Sound mode to Mono.
Noise will be reduced and reception may improve.
Note:
If you experience noise with a particular program on whose
channel reception is usually good, try setting MTS mode to
Auto, then switch
to Mono (monaural).
Selecting the dual 1 or dual 2 mode
- analog only -
You can hear only dual 1 or dual 2 sound selected, whenever
bilingual programs are received.
1�
, then press v or w to display the SOUND
Press
menu then press
.
2�
Press s or r to select Dual, then press
to select Dual 1 or Dual 2.
Notes:
When the MTS setting is in Mono mode, the Dual menu is
•
not selectable.
The Dual menu setting status remains even if the TV is
•
turned off.
Using the TV's features (General)
Selecting the stereo programs
1�
When a stereo program is received, Stereo appears.
2�
Press
appear cyclically on the screen.
Selecting the bilingual programs
1�
When a bilingual program is received, Dual appears.
2�
Press
and v or w
differs according to the transmission system: NICAM or
German stereo/bilingual broadcast.
Display
Dual 1
Dual 2
Mono
Note:
These settings are not stored in the TV memory.
Adjusting the sound quality
1�
Press
menu then press
2�
Press s or r to select Selectable Sound, then press
and v or w to select Standard, Movie, Music and
User.
and v or w
3�
In User item , you can press s or r to select an item
you want to adjust, press v or w to adjust the settings as
required.
When you select Standard, Movie or Music, the setting
was fixed and can't adjust.
Selection
Bass
Treble
Balance
to select the Auto/Mono mode. Auto and Mono
to select the sound to be heard. The sound
Sound to be heard
German stereo/
NICAM
bilingual broadcast
Sub I sound
Main sound
Sub II sound
Sub sound
Main sound
---
, then press v or w to display the SOUND
.
Pressing
v
weaker
stronger
weaker
stronger
decreases the right
decreases the left
channel
channel
- analog only -
- analog only -
w
1