Rear Panel - Positive Grid Spark 40 User Manual

REAR PANEL

(K) Bluetooth Status Indicator
•
Indicates the status of your Bluetooth audio connection:
•
Connected (blue light)
•
Waiting to connect (flashes)
•
Disabled (LED off)
(L) AUX In
Connect the analog output of an audio device to this port. USB audio playback and Bluetooth audio are
disabled when a connector is inserted into this port.
(M) USB Port
Use the supplied USB cable to connect your computer to the Spark amp for USB recording or firmware
updates.
(N) DC In
Connects the supplied power adapter. Only use the specified AC adapter. Using any other AC adapter may
cause malfunctions.
USING SPARK AMP AS A WIRELESS SPEAKER
•
Turn on the Bluetooth function on your device, then select "Spark 40 Audio" from the list of available
options.
•
Spark Amp automatically pairs with previously connected devices when turned on. It can also be paired
with other devices (for example, if a previously connected device is not available).
•
To reset pairing information, turn on Spark Amp while holding down preset button 4 for 3 seconds.
Remove Spark Amp from recognized devices in Bluetooth settings before pairing again.
04