Using Cableclear /Dnr (Digital Noise Reduction); Selecting The Color Temperature; Black - Toshiba 42HP95 Owner's Manual

Adjusting the picture
Using CableClear
reduction)
The CableClear ® digital noise reduction feature allows you to
reduce visible interference in your TV picture. This may be
useful when receiving a broadcast with a weak signal (especially
a Cable channel) or playing a noisy video cassette or disc.
To select CableClear/DNR preferences:
1. Press MENU and open the Video menu.
2. Highlight Advanced Picture Settings and press ENTER.
3. Press z to highlight the CableClear/DNR field, and then
press x or • to make a selection.
Video
Picture Settings
Advanced Picture Settings
Theater Settings
Advanced Picture Settings
Dynamic Contrast
MPEG Noise Reduction
CableClear
Color Temperature
Reset
Note:
• For the current inputs Antenna, Video 1, Video 2, or Video 3,
the menu will display the text "CableClear. " If the signal is
analog, the available selections are Off, Low, Middle, High,
and Auto. If the signal is digital, the menu will display the text
"CableClear" and will be "grayed out" with "Off" selected.
• For the current inputs ColorStream HD1, ColorStream HD2,
or HDMI, the menu will display the text "DNR. " If the video
resolution is 480i, the available selections are Off, Low,
Middle, High, and Auto. If the video resolution is 1080i, the
available selections are Off, Low, and High. If the video
resolution is anything other than 480i or 1080i, the menu will
display the text "DNR" and will be "grayed out" with "Off"
selected.
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
82
#01E_081-088_4250HP95 82

Black

(E) 42/50HP95 *web 213:276
Chapter 8: Using the TV's features
(continued)
® /DNR (digital noise
ANT 1
On
Low
Auto
Cool
Done
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

Selecting the color temperature

You can change the quality of the picture by selecting from three
preset color temperatures (cool, medium, and warm), as
described below.
Mode Picture Quality
Cool blueish
Medium neutral
Warm reddish
To select the color temperature:
1. Press MENU and open the Video menu.
2. Highlight Advanced Picture Settings and press ENTER.
3. Press z to highlight the Color Temperature field, and then
press x or • to select the mode you prefer (Cool, Medium,
or Warm).
Video
Picture Settings
Advanced Picture Settings Advanced Picture Settings
Theater Settings
Advanced Picture Settings
Dynamic Contrast On
MPEG Noise Reduction Low
CableClear Auto
Color Temperature Cool
Reset Done
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
Note:
If you select one of the factory-set picture modes (Sports,
Standard, or Movie) and then change the color temperature
mode, the picture mode automatically changes to Preference in
the Picture Settings menu.
05.9.12, 10:09 PM
ANT 1