Adjusting The Picture; Selecting The Picture Mode; Adjusting The Picture Quality; Black - Toshiba 42HP95 Owner's Manual

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from four picture
modes, as described below.
Mode Picture Quality
Sports Bright and dynamic picture (factory setting)
Standard Standard picture settings (factory setting)
Movie Lower contrast for darkened room (factory setting)
Preference Your personal preferences
To select the picture mode:
Press PIC MODE on the remote control.
The following popup menu appears on-
screen.
Picture Settings Mode: Standard
Mode Standard
Repeatedly press PIC MODE to cycle
among the modes.
To select the picture mode using the menu system:
1. Press MENU and open the Video menu.
2. Highlight Picture Settings and press ENTER.
Video
Picture Settings
Advanced Picture Settings
Theater Settings
Picture Settings
Mode
Contrast 100
Brightness 50
Color 50
Tint 0
Sharpness 50
Reset
3. Press z to highlight the Mode field, and then x • to select
the mode you prefer.
Picture Settings Mode: Standard
Mode Standard
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
Note:
• The picture mode you selected is for the current input
selection only (ANT 1 in the example above). You can select
a different picture mode for each input selection.
• If you select one of the factory-set picture modes (Sports,
Standard, or Movie) and then change a picture quality setting
(for example, increase the contrast or change the color
temperature), the picture mode automatically changes to
Preference in the Picture Settings menu.
#01E_081-088_4250HP95 81

Black

(E) 42/50HP95 *web 213:276
Chapter 8: Using the TV's features
PIC
MODE
ANT 1
Sports
Done
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

Adjusting the picture quality

You can adjust the picture quality (contrast, brightness, color,
tint, and sharpness) to your personal preferences.
x Pressing •
Selection
Contrast lower
Brightness darker
Color paler
Tint reddish
Sharpness softer
To adjust the picture quality:
1. Press MENU and open the Video menu.
2. Highlight Picture Settings and press ENTER.
Video
Picture Settings
Advanced Picture Settings
Theater Settings
Picture Settings
Mode Sports
Contrast 100
Brightness 50
Color 50
Tint 0
Sharpness 50
Reset Done
3. Press y or z to select the picture quality you want to adjust
(Contrast, Brightness, Color, Tint, or Sharpness), and then
x and • to adjust the setting, as described in the table
above.
Picture Settings Mode: Preference
Sharpness 70
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
The picture qualities you adjusted are automatically saved in the
Preference mode (see "Selecting the picture mode," above left).
05.9.12, 10:09 PM
higher
lighter
deeper
greenish
sharper
ANT 1
81