Adding Channels To The Tv's Memory; Programming Channels Automatically; Adding And Erasing Channels Manually; Changing Channels - Toshiba 42HP66 Owner's Manual

Adding channels to the TV's memory

When you press CH
you have programmed into the TV's channel memory. Follow the steps
below to program channels into the channel memory.

Programming channels automatically

Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase channels manually.
To add channels automatically:
1. Press TV to select the TV mode.
2. Press MENU, then press
3. Press ▲ or ▼ until the TV/CABLE
selection is highlighted.
4. Press or
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
5. Press ▼ until the CH PROGRAM selection is highlighted.
6. Press to start channel programming. The TV will automatically
cycle through all the TV or Cable channels (depending on which you
selected), and store all active channels in the channel memory.
While the TV is cycling through the channels, the message
"PROGRAMMING NOW PLEASE WAIT" appears.
7. When channel programming is complete, the message "COMPLETED"
appears.
8. Press CH or

Adding and erasing channels manually

After you have programmed the channels automatically, you can add or
erase specific channels manually.
To add or erase channels manually:
1. Press TV to select the TV mode.
2. Press MENU, then press
3. Press ▲ or ▼ to highlight ADD/ERASE.
4. Press to display the ADD/ERASE
menu.
5. Select the desired channel to be
memorized or deleted using ▲ or
▼. Press
or
ADD or ERASE.
6. Repeat step 5 for other channels
you want to add or erase, then
press ENTER.
7. Press EXIT to return to the normal screen.
To add a digital channel you are watching:
Select a channel you want to add. Press ▲ or ▼ to select ADDING
CHANNEL in step 4 above, then press .
To erase all channels from the channel memory:
Press ▲ or ▼ to select CLEAR ALL in step 4 above, then press
All channels are erased from the channel memory. (You can still use the
Channel Numbers on the remote control to tune a channel.)

Changing channels

To change to the next programmed channel:
Press Channel ▲ / ▼ on the TV or CH
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9) on the remote control.
For example, to select channel 125, press 1, 2, 5.
To change to a specific digital channel:
Press the first 3 digits, then press 100, followed by the remaining 3
digits. For example, to select channel 015-001, press 0, 1, 5, 100, 0,
0, 1.
3X70701A_En_p18-25 24
or , your TV will stop only on the channels
or to display the SETUP menu.
S E T U P
to highlight either
L A N G U A G E
C L O C K S E T
T V / C A B L E
C H P R O G R A M
A D D / E R A S E
S E L E C T
to view the programmed channels.
or to display the SETUP menu.
SETUP
LANGUAGE
CLOCK SET
TV / CABLE
to select either
CH PROGRAM
ADD / ERASE
SELECT
on the remote control.
/
INPUT DISPLAY
E N G L I S H
T V / C A B L E
A D J U S T
ENGLISH
In addition to cycling through your pro-
CABLE
grammed channels, the Channel
buttons will also cycle through the video
ADJUST
input sources (page 31) in the order
illustrated below.
ANT (programmed channel)
PC
HDMI2 HDMI1
.
Note:
Digital cable channels may be represented by
channel numbers that include a "dash" (e.g.,
85–002.) These digital channel numbers may
not match the numbers in the channel line-up
provided by your cable company. This is not a
malfunction.
Note:
If the remote control does not operate your TV,
press the "TV" button on the remote control
and try again.
24
3/7/06, 6:24 PM
Channel
Numbers
TV
/
Channel
Menu/Enter
Exit
CT-885
or
VIDEO1 VIDEO2
VIDEO3
ColorStream HD2 ColorStream HD1