Link All Devices To Wireless Network - Honeywell Prestige IAQ THX9000 System Installation Manual

2-wire Prestige® IAQ and RF EIM

Link all devices to wireless network

3
The following instructions detail the connection process of the Prestige
IAQ thermostat, Equipment Interface Module (EIM), and wireless
RedLINK™ accessories.
NOTE: If the system is zoned using a TrueZONE™ panel with
RedLINK™, the thermostat and accessories are connected to the Wireless
Adapter. For more information, follow the connection process in the
TrueZONE™ instructions.
Connection of Prestige IAQ Thermostat to the Equipment Interface
Module
C O N N E C
T E D
C O N N E C
T
69-2445EFS—03
Next
MCR32400
Next
MCR32401
Next
MCR32402
CONNECT
LED
CONNECT
S 2
S 2
BUTTON
S 1
S 1
M32399
1. Connect 24 V power to the
Prestige IAQ and EIM.
2. Select language and press NEXT.
3. If zoned, select zone number and
press NEXT; If not zoned, select
Not Zoned and press NEXT.
4. Name thermostat and press NEXT.
5. Press and release the CONNECT
button at the Equipment Interface
Module (EIM). The CONNECT LED
on EIM will flash green.
6