Adding And Erasing Channels Manually; Changing Channels - Toshiba TheaterWide 27HL85 Owner's Manual

Adding and erasing channels manually

After you have automatically programmed the active channels into the
TV's channel memory, you can manually add or erase specific
channels.
To manually add or erase channels:
1. Select the channel you want to add or erase. If you are adding a
channel, you must select the channel using the Channel Number
buttons.
2. Press MENU, and then press x or • until the SET UP menu
appears.
3. Press y or z to highlight ADD/ERASE.
SET UP
LANGUAGE ENGLISH
TV
TV/CABLE
CH PROGRAM ENTER
ADD/ERASE ADD
CH LABELING
ENTER
VIDEO LABEL
MENU BACK EXIT WATCH TV
4. Press x or • to select ADD or ERASE, depending on the
function you want to perform.
5. Repeat steps 1–4 for other channels you want to add or erase.

Changing channels

To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100).
For channels 100 and higher, press the 100 button, and then the
next two numbers. For example, to select channel 125, press 100,
2, 5.
To change to the next programmed channel:
Press Channel y or z on the TV or remote control.
To use the Program list to change to a specific programmed channel
(or video mode):
Press ENTER to display the Program list, and then press y or z
to scroll through the Program list. When the desired channel
number (or video mode) is highlighted, press ENTER.
11
9
7
6
2
HDMI
ColorStreamHD
VIDEO 2
VIDEO 1
1/2
POWER
TV / VIDEO RECALL
INFO
1 2 3
4 5 6
Channel
7 8 9 Numbers
+10 CHRTN
0
100 ENT
FAV
MENU
MENU
DVDMENU
yzx •
FAV
ENTER
TV
CBL/SAT CH VOL
Channel yz
VCR
DVD
POP DIRECT CH MUTE SLEEP
TV/VCR PAUSE STOP PLAY
FREEZE SOURCE SPLIT
REW FF SKIP / SEARCH
CH SCAN SWAP POP CH
REC LIGHT
E
F
S
25