Adding Channels To The Tv's Memory; Programming Channels Automatically; Adding And Erasing Channels Manually; Changing Channels - Toshiba 20HL85 Owner's Manual

Adding channels to the TV's memory

When you press CH 3 or 4, your TV will stop only on the channels you
have stored in the TV's channel memory. Follow the steps below to
program channels into the channel memory.

Programming channels automatically

Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase channels manually.
To add channels automatically:
1. Press TV to select the TV mode.
2. Press MENU, then press
3. Press L or M until the TV/CABLE
selection is highlighted.
4. Press or to highlight either
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
5. Press M until the CH PROGRAM selection is highlighted.
6. Press to start channel programming. The TV will automatically
cycle through all the TV or Cable channels (depending on which you
selected), and store all active channels in the channel memory.
While the TV is cycling through the channels, the message
"PROGRAMMING NOW-PLEASE WAIT" appears.
7. When channel programming is complete, the message "COMPLETED"
appears.
8. Press CH 3 or 4 to view the programmed channels.

Adding and erasing channels manually

After you have programmed the channels automatically, you can add
or erase specific channels manually.
To add or erase channels manually:
1. Press TV to select the TV mode.
2. Select the channel you want to add or erase. If adding channels, you
must select the channel to add using the Channel Number buttons.
3. Press MENU, then press
display the SETUP menu.
4. Press L or M to highlight ADD/
ERASE.
5. Press or to select ADD or
ERASE, whichever function you
want to perform.
6. Repeat steps 1-5 for other channels you want to add or erase.

Changing channels

To change to the next programmed channel:
Press Channel 3 / 4 on the TV or CH 3 / 4 on the remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100) on the remote control.
For example, to select channel 125, press 100, 2, 5.
J3U70101C(E)P17-24
or to display the SETUP menu.
S E T U P
L A N G U A G E
C L O C K S E T
T V / C A B L E
C H P R O G R A M
A D D / E R A S E
: S E L E C T
or to
S E T U P
L A N G UAG E
C L O C K S E T
T V / C A B L E
C H P RO G R A M
A D D / E R A S E
: S E L E C T
23
INPUT DISPLAY
E N G L I S H
1 2 : 0 0 A M
T V / C A B L E
A D D
: A D J U S T
In addition to cycling through your
programmed channels, the Channel 3 / 4
buttons will also cycle through the video
E N G L I S H
input sources (page 30) in the order
1 2 : 0 0 A M
C A B L E
A D D / E R A S E illustrated below.
: A D J U S T
ANT (programmed channel)
PC
Note:
If the remote control does not operate your TV,
press the "TV" button on the remote control
and try again.
23
15/06/2005, 4:11 PM
Channel
Numbers
TV
3 4
Channel
Menu
CT-885
VIDEO1 VIDEO2
HDMI ColorStream HD