Adding And Erasing Channels Manually; Changing Channels - Toshiba 32HLX84 Owner's Manual

Adding and erasing channels manually

After you have automatically programmed the active channels into the
TV's channel memory, you can manually add or erase specific
channels.
To add or erase channels:
1. Select the channel you want to add or erase. If you are adding a
channel, you must select the channel using the Channel Number
buttons.
2. Press MENU, and then press x or • until the SET UP menu
appears.
3. Press y or z to highlight ADD/ERASE, and then press ENTER
to display the pull-down menu.
SET UP
LANGUAGE
ANT 1 / 2
TV / CABLE
CH PROGRAM
ADD / ERASE
GRAY LEVEL
: S E L E C T ENTER : SET
4. Press y or z to select ADD or ERASE, depending on the
function you want to perform.
5. Repeat steps 1–4 for other channels you want to add or erase.

Changing channels

To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100).
For channels 100 and higher, press the 100 button, and then the
next two numbers. For example, to select channel 125, press 100,
2, 5.
To change to the next programmed channel:
Press Channel y or z on the TV or remote control.
30
A D D
E R A S E
POWER
TV
LIGHT SLEEP
CABLE/SAT
VCR
1 2 3
DVD
Channel
AUDIO1
AUDIO2 4 5 6
Number
MODE
7 8 9
PIC SIZE
+10
0
100/
ENT
ACTION
MENU
MENU
FAV
ENTER
ENTER
yzx •
FAV
Channel yz
VOL
CH
EXIT
DVD CLEAR
DVD RTN
CH RTN INPUT RECALL MUTE
SLOW/DIR SKIP/SEARCH