Adding Channels To The Tv's Memory; Progoramming Channels Automatically; Adding And Erasing Channels Manually; Changing Channels - Toshiba 23HL84 Owner's Manual

Adding channels to the TV's memory

When you press CH
you have stored in the TV 's channel memory. Follow the steps below to
program channels into the channel memory.
Programming channels automatically
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase channels manually.
To add channels automatically:
1. Press MENU, then press
2. Press or until the TV/CABLE
selection is highlighted.
3. Press or to highlight either
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
4. Press until the CH PROGRAM selection is highlighted.
5. Press or to start channel programming. The TV will automatically
cycle through all the TV or Cable channels (depending on which you
selected), and store all active channels in the channel memory.
While the TV is cycling through the channels, the message
"PROGRAMMING NOW-PLEASE WAIT" appears.
6. When channel programming is complete, the message "COMPLETED"
appears.
7. Press CH or

Adding and erasing channels manually

After you have programmed the channels automatically, you can add
or erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase. If adding channels, you
must select the channel to add using the Channel Number buttons.
2. Press MENU, then press
display the SETUP menu.
3. Press or to highlight ADD/
ERASE.
4. Press or to select ADD or
ERASE, whichever function you
want to perform.
5. Repeat steps 1-4 for other channels you want to add or erase.

Changing channels

To change to the next programmed channel:
Press Channel or
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100) on the remote control.
For example, to select channel 125, press 100, 2, 5.
J3R50121A(E)P17-24 23
or , your TV will stop only on the channels
or to display the SETUP menu.
to view the programmed channels.
or to
S E T U P
L A N G UAG E
C L O C K S E T
T V / C A B L E
C H P RO G R A M
A D D / E R A S E
: S E L E C T
on the TV or CH or on the remote control.
You also can change the input source using
E N G L I S H
1 2 : 0 0 A M the Channel
C A B L E
A D D / E R A S E
channels and input sources will change as
below.
: A D J U S T
ANT (programmed channel)
PC
23
12/08/2004, 10:50 AM
Channel
Numbers
Menu
Channel
/ buttons . The programmed
VIDEO1 VIDEO2
HDMI ColorStream HD