Adding Channels To The Tv's Memory; Programming Channels Automatically; Adding And Erasing Channels Manually; Changing Channels - Toshiba 27A46C Owner's Manual

Adding channels to the TV's memory

When you press CH +/- on the remote control or CHANNEL M/L on
the TV front panel, your TV will stop only on the channels stored in the
TV's channel memory. Follow the steps below to program channels into
the memory.

Programming channels automatically

Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory
automatically, you can add or erase specific channels manually.
To add channels automatically:
1. Press MENU, then press
2. Press L or M until the TV/CABLE
selection is highlighted.
3. Press or
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
4. Press M to select CH PROGRAM.
5. Press or
cycle through all the TV or Cable channels (depending on which
you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
"PROGRAMMING NOW-PLEASE WAIT" appears.
6. When channel programming is complete, the message "COMPLETED"
appears.
7. Press CH + or – to view the programmed channels.

Adding and erasing channels manually

After you have programmed the channels automatically, you can add
or erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase.
If you are adding a channel, you must select the channel using the
Channel Number buttons.
2. Press MENU, then press
to display the SETUP menu.
3. Press L or M to highlight ADD/
ERASE.
4. Press or
ERASE, whichever function you
want to perform.
5. Repeat steps 1–4 for other
channels you want to add or erase.

Changing channels

To change to the next programmed channel:
Press CHANNEL M/L on the TV front panel or CH +/– on the
remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100) on the remote
control.
For example, to select channel 125, press 100, 2, 5.
J3S20421A(E)_P07-16
or to display the SETUP menu.
to highlight either
PICTURE AUDIO
TV / CABLE
CH PROGRAM
ADD / ERASE
SELECT
to start channel programming. The TV will automatically
or
PICTURE AUDIO
TV / CABLE
to select ADD or
CH PROGRAM
ADD / ERASE
SELECT
16
POWER
1
4
CH
SETUP OPTION
7
TV CABLE
START
ADD
VOL
–
ADJUST
EXIT
VOL
RESET CAP/TEXT
DISPLAY DVD CLEAR
CODE
CH
SETUP OPTION
CABLE
START
ADD ERASE
ADJUST
16
2/12/05, 5:26 PM
TV VCR CABLE
DVD
2 3
+10
5 6 100
Channel
8 9 0 Numbers
CH +
Channel +/–
VOL
MENU/
+
ENTER
Menu
CH –
RECALL TV/VIDEO FAV
CH RTN FAV
1/2
TOP MENU DVD MENU
MTS SLEEP MUTE