Makita UH6570 Technical Information page 4

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Motor, Switch and Power supply cord (cont.)
ASSEMBLING
Take the disassembling step in reverse.
Note: 1) When setting Armature and Gear housing complete in place, pass Lever through Field at the same time while
inserting the hinge portion of Lever into Housing L carefully because the hinge tends to remove. (Fig. 12)
Insert the hinge portion of Gear housing complete into Housing L as well.
2) When Armature, Gear housing complete and Lever are set in place, Ball bearing 6000ZZ on Fan side of Armature
has to be partly exposed from Gear housing complete as illustrated in Fig. 13.
Fig. 12
Hinge portion of Lever
Fig. 13
Field
Armature
Hinge portion of
Gear housing complete
A part of Ball bearing 6000ZZ
Gear housing complete
A part of Ball bearing 6000ZZ has to
be exposed from Gear housing complete.
P 4/ 7
Lever