Rear Terminal Cover; Cable Clamper; Adjusting The Tv Viewing Angle - Toshiba 15DL15 Owner's Manual

Rear terminal cover

The connection panel is hidden behind the terminal cover.
1. Remove the cover. Release the two hooks on the bottom of
the cover.
2. Install cables as necessary.
3. Reinstall the cover. Align the holes on the TV back with the
three tabs on the rear terminal cover as shown.
4. Close the cover.

Cable clamper

The cable clamper can be used to bundle the connection cables
(see page 10).
Cable clamper

Adjusting the TV viewing angle

You can adjust the angle of the TV screen.
Swivel angle
WARNING: RISK OF
SERIOUS PERSONAL
INJURY OR EQUIPMENT
DAMAGE!
Never grasp the cable clamper when
moving or lifting the TV. The cable clamper
could break, causing the TV to fall.
Tilt angle
E
F
S
9