Using The Remote Control; Learning About The Remote Control; Installing The Remote Control Batteries; Remote Control Effective Range - Toshiba 15DL15 Owner's Manual

Using the remote control

Learning about the remote control

turns the TV on and off (standby mode*)
POWER
turns off the sound (page 26)
MUTE
displays TV settings on-screen (page 30)
RECALL
selects stereo or SAP sound (page 26)
MTS
selects the video input source (page 20)
TV/VIDEO
Channel Numbers (0-9, 100)
switches between the last two viewed channels (page 20)
CH RTN
saves your menu settings (page 17)
ENTER
select or adjust menu items (page 17)
yz x •
cycles through programmed channels (page 18)
CH yz
adjusts the volume level
VOL - +
selects the Caption or Text mode (page 25)
CC
opens the menu system (page 17)
MENU
exits the menu system (page 17)
EXIT
accesses to the automatic TV shut-off function (page 25)
SLEEP
selects the picture mode (page 23)
PICTURE
selects the sound mode (page 27)
SOUND
cycles through favorite channels (page 19)
FAV. CH

Installing the remote control batteries

To install the batteries:
1. Open the battery cover on the back of the remote control.
2. Install two batteries (R6 size "AA"). Match the + and – signs on
the batteries to the signs on the battery compartment.
3. Replace the battery cover on the remote control until the lock
snaps.

Remote control effective range

* The TV is in standby mode when the power is OFF but the power cord is still plugged into an outlet.
16
allow direct access to channels (page 19)
MUTE POWER
TV/VIDEO MTS RECALL
1 1 2 3
4 5 6
7 8 9
CH RTN C
0
100/
CH
VOL VOL
ENTER
CH
EXIT MENU CC
SOUND PICTURE SLEEP
FAV. CH
Caution:
Never throw batteries into a fire.
Note:
• Be sure to use AA size batteries.
• Dispose of batteries in a designated
disposal area.
• Batteries should always be disposed of with
the environment in mind. Always dispose of
batteries in accordance with applicable laws
and regulations.
• If the remote control does not operate
correctly, or if the operating range becomes
reduced, replace batteries with new ones.
• When necessary to replace batteries in the
remote control, always replace both
batteries with new ones. Never mix battery
types or use new and used batteries in
combination.
• Always remove batteries from remote
control if they are dead or if the remote
control is not to be used for an extended
period of time. This will prevent battery acid
from leaking into the battery compartment.