Download Print this page

Bestop 41409 Installation Instructions page 4

Hitch rack bracket

Advertisement

Step Four
Install Tray Assembly
Turn the Tray Assembly right side up and slide the end of the Extension into the receiver hitch of the vehicle.
Align the threaded hole in the Extension with the hitch pin hole in the receiver hitch. Insert the 1/2 x 1" Hex Bolt
with 7/16" Flat Washer through the hole in the hitch and tighten securely into the threaded hole in the Extension.
We warrant our product to be free from defects in material and workmanship, for terms specified below, provided there has been normal use and proper maintenance. This warranty applies to the original purchaser
only. All remedies under this warranty are limited to the repair or replacement of any item or items found by the factory to be defective within the time period specified.
If you have a warranty claim, first you must call our factory at the number below for instructions. You must retain proof of purchase and submit a copy with any items returned for warranty work. Upon completion of
warranty work, if any, we will return the repaired or replaced item or items to you freight prepaid. Damage to our products caused by accidents, fire, vandalism, negligence, misinstallation, misuse, Acts of God, or by
defective parts not manufactured by us, is not covered under this warranty.
THE WARRANTY TIME PERIOD IS AS FOLLOWS: ALL "HARD GOODS" MANUFACTURED BY OUR COMPANY (USING PRIMARILY VINYLS, PLASTICS, AND/OR FOAM): ONE YEAR FROM DATE OF PURCHASE.
ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE CREATED HEREBY ARE LIMITED IN DURATION TO THE SAME DURATION AND SCOPE AS THE EXPRESS
WRITTEN WARRANTY. OUR COMPANY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
For further information or request for warranty work, please contact:
41409/41410 pg 4
Receiver Hitch
Extension
1/2" x 1" Hex Bolt and
7/16" Flat Washer
LIMITED WARRANTY
Bestop Inc.
Customer Service
(800)346-3910
(303)465-1755
Do not load the tray with more than
200 evenly distributed Pounds. Be
careful when operating the vehicle
because the loaded tray may effect
Caution
handling. Remember that the tray
extends beyond the rear bumper
when backing.
0103 Rev. A

Advertisement

loading

This manual is also suitable for:

41410