Activating/Deactivating Call Transfer (Ect); Call Transfer In A Communications System - Deutsche Telekom T-Eumex 704PC LAN User Manual

Configuration via Telephone
If the ISDN service ECT is available in the exchange, you can activate and deactivate
it as required:
Lift the handset. The configuration mode is active and you hear a special internal
b
dialling tone.
9 9 0
Select the code digits 990.
7 1
Select the code digits 71 to activate
or
7 0
the code digits 70 to deactivate ECT.
# q
Press the hash key. You hear a positive acknowledgement tone.
d
Replace the handset.
If your Eumex 704PC LAN is installed as a secondary system behind another commu-
nications system, it may be necessary (depending on the type of primary system) to
edit the following setting in order to transfer calls in the primary system:
Lift the handset. The configuration mode is active and you hear a special internal
b
dialling tone.
9 9 0
Select the code digits 990.
8 1
Select the code digits 81 to activate
or
8 0
the code digits 80 to deactivate call transfer in the primary communications system.
# q
Press the hash key. You hear a positive acknowledgement tone.
d
Replace the handset.
52
All manuals and user guides at all-guides.com

Activating/Deactivating Call Transfer (ECT)

Call Transfer in a Communications System