Dtmf Post-Dialling; Malicious Call Identification (Mcid); Calling Your T-Netbox - Deutsche Telekom T-Eumex 704PC LAN User Manual

Telephoning

DTMF Post-dialling

DTMF post-dialling is only possible during external calls when, for example, an auto-
matic announcement prompts you to post-dial digits and symbols (1 to 0,
during fax polling, during a remote answerphone enquiry, or when communicating
with a voice mailbox or other application.
There is an external call. You hear e.g. the answerphone signal or an automatic
c
announcement.
t
You can now post-dial.
c
The external call remains connected.

Malicious Call Identification (MCID)

Using this ISDN service, you can have the data of a malicious call recorded in your
telephone network provider's exchange. The service must have been requested prior
to use and is charged for. For further details, please contact your network provider.
c
You receive a call from an undesirable caller.
r # 0
Press the R-key, then the hash key, and dial 0.

Calling Your T-NetBox

If you have a T-NetBox from Deutsche Telekom, saved messages or incoming faxes
are signalled by the "Message" LED (see the note on p. 53). Please refer to the T-Net-
Box User Guide for instructions on how to retrieve information.
In order to call the T-NetBox and retrieve your messages, you must always use a
telephone to which you have assigned the first MSN, because the LED signalling
is always transmitted to this number (cf. the section entitled "Call Assignment" on
p. 37).
Example: if you have configured your communications system so that calls to the
MSN with the code digit 1 are signalled on telephones 11 and 12, you can then use
both these telephones for T-NetBox enquiries.
All manuals and user guides at all-guides.com
*
and #),
27