1. Manuals
  2. Brands
  3. Deutsche Telekom Manuals
  4. Wireless Access Point
  5. T-Eumex 704PC LAN
  6. User manual

Deutsche Telekom T-Eumex 704PC LAN User Manual

Experience high-speed internet access for the entire network with t-dsl
Hide thumbs Also See for T-Eumex 704PC LAN:
Table of Contents

Advertisement

Quick Links

Download this manual
===!T§
Deutsche
Telekom
T-Eumex 704PC LAN.
Experience High-speed Internet Access
for the Entire Network with T-DSL.
All manuals and user guides at all-guides.com
User Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T-Eumex 704PC LAN and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Deutsche Telekom T-Eumex 704PC LAN

Summary of Contents for Deutsche Telekom T-Eumex 704PC LAN

  • Page 1 All manuals and user guides at all-guides.com ===!T§ Deutsche Telekom User Guide T-Eumex 704PC LAN. Experience High-speed Internet Access for the Entire Network with T-DSL.
  • Page 2 If you ignore this guide, Deutsche Telekom will not accept any liability for damages resulting from negligent or wilful disregard of the instruc- tions contained in it.
  • Page 3 All manuals and user guides at all-guides.com Symbols Used General note Important safety precautions Lift the handset Replace the handset Hold your conversation Dial telephone number or select code digit You hear an acknowledgement tone Your telephone rings 3-party conference Press the R-key (aka the flash or enquiry key) Use the star key to activate or deactivate a feature Use the hash key to quit programming...
  • Page 4 All manuals and user guides at all-guides.com...

  • Page 5: Table Of Contents

    All manuals and user guides at all-guides.com Contents General ......................1 A Word of Welcome........................1 The Features of the Eumex 704PC LAN ................2 Supported ISDN Features .......................3 Safety Precautions........................4 Power Failure ..........................4 Scope of Delivery........................5 Mounting and Commissioning ................5 Scope of Delivery........................5 What Does the Eumex 704PC LAN Require?..............6 Mounting and Installation Sequence ..................7 Mounting Location........................8...
  • Page 6 All manuals and user guides at all-guides.com Contents DTMF Post-dialling .........................27 Malicious Call Identification (MCID)..................27 Calling Your T-NetBox......................27 Staying in Touch ....................28 Call Forwarding ........................28 Activating Call Forwarding....................28 Deactivating Call Forwarding ....................29 Accepting or Rejecting Call Waiting..................30 Activating Call-waiting Protection ..................31 Deactivating Call-waiting Protection ...................31 Charge Accounts........................32 Emergency Numbers......................32...
  • Page 7 All manuals and user guides at all-guides.com Contents Activating/Deactivating Call Data Recording ..............51 Activating/Deactivating Call Transfer (ECT)...............52 Call Transfer in a Communications System ...............52 Activating/Deactivating T-NetBox Signalling..............53 SMS in a Fixed-line Network....................54 Resetting the Communications System ................55 Restoring the Default Settings....................55 Remote Configuration..................56 The PC Software....................57 General ............................57...
  • Page 8 All manuals and user guides at all-guides.com Contents Home Network....................87 Installation ..........................87 Data Transfer (Sharing and Mapping Drives)..............88 The Web Configurator..................90 Starting the Web Configurator .....................90 ISDN - Basic Settings ......................91 T-DSL Access Data.........................92 ISDN Access Data ........................93 PPP Settings..........................94 Filter ............................95 Router Configuration ......................96...

  • Page 9: General

    All manuals and user guides at all-guides.com General A Word of Welcome The Eumex 704PC LAN is an ISDN communications system enabling you to connect up to four analogue devices to a basic ISDN connection. In addition the Eumex 704PC LAN has an Ethernet 10BaseT network with four ports. One of the Ethernet ports is used to make direct connections to T-DSL, while the remaining three can be used to connect PCs.

  • Page 10: The Features Of The Eumex 704Pc Lan

    All manuals and user guides at all-guides.com General The Features of the Eumex 704PC LAN • Call waiting • Call pick-up from terminals and answerphones • Automatic callback ("on no reply" and "on busy") • CLIP (display of calling line number) on analogue terminals •...

  • Page 11: Supported Isdn Features

    All manuals and user guides at all-guides.com General Supported ISDN Features • Call waiting • Call forwarding ("immediately," "on busy" and "after a specified time") • 3-party conference (two 3-party conferences can take place simultaneously) • Enquiry calls • Callback on busy (CCBS) •...

  • Page 12: Safety Precautions

    All manuals and user guides at all-guides.com General Safety Precautions Do not open the housing. Unauthorised opening of the housing and improper repairs can endanger the user. In addition, the warranty is invalidated. Do not continue using damaged or defective plugs or AC adapters with defective housings as these could cause electric shocks.

  • Page 13: Scope Of Delivery

    (CAPI), as well as CapiPort, CapiControl and the configuration software • The complete ISDN software Teledat RVS-COM for Win 98/Me/2000/XP for data transfer, class 3 and 4 faxes, PC telephony, answerphone function, and SMS in the wired network • Deutsche Telekom’s T-Online software...

  • Page 14: What Does The Eumex 704Pc Lan Require

    • You must have a basic Euro-ISDN connection with a network terminator (NTBA) as supplied by Deutsche Telekom (DSS 1). The Eumex 704PC LAN is not designed to be operated on any other type of connection and any attempt to do so will lead to faulty operation.

  • Page 15: Mounting And Installation Sequence

    All manuals and user guides at all-guides.com Mounting and Commissioning Mounting and Installation Sequence The Eumex 704PC LAN consists of various components. This User Guide first describes how to mount the communications system and how to connect terminals such as telephones. You can subsequently operate the devices. However, we recommend that you configure the Eumex 704PC LAN according to your personal requirements before using it for the first time.

  • Page 16: Mounting Location

    All manuals and user guides at all-guides.com Mounting and Commissioning Mounting Location The ambient operating temperature for the Eumex 704PC LAN must not be lower than +5 °C or higher than +40 °C. For this reason, do not mount the Eumex 704PC LAN •...

  • Page 17: Choosing A Location For Your Eumex 704Pc Lan

    We recommend you to install a surge protector for protection against sudden high voltages such as those sometimes occurring during thunderstorms. Consult your electrician or Deutsche Telekom for advice. Choosing a Location for Your Eumex 704PC LAN You can simply place the Eumex 704PC LAN on a solid surface, e.g. a table. Please note that under certain circumstances the rubber pads on the base of the Eumex 704PC LAN can leave unseemly marks on furniture.

  • Page 18: Connecting Devices

    All manuals and user guides at all-guides.com Connecting Devices Connection Diagram External S 0 AC adapter T-DSL 1a/b 2a/b 3a/b 4a/b T-ISDN Internal telephone PC 1 to 3 numbers 11 12 13 14 T-DSL LAN 1 LAN 2 LAN 3 LAN 4 Connecting Do not connect the Eumex 704PC LAN during a thunderstorm, as this could lead to...

  • Page 19: Connecting The Eumex 704Pc Lan To T-Isdn

    Connecting the Eumex 704PC LAN to T-ISDN Regulations permit the general public to connect the Eumex 704PC LAN to the Deutsche Telekom network. You can thus connect the Eumex 704PC LAN yourself if the following conditions are met: • The device may only be connected to a basic Euro-ISDN connection. Do not under any circumstances connect it to lines or equipment in the analogue network.

  • Page 20: Connecting Analogue Terminals To The Eumex 704Pc Lan

    All manuals and user guides at all-guides.com Connecting Devices Connecting Analogue Terminals to the Eumex 704PC LAN You can connect up to four analogue terminals to your communications system. We recommend you to deploy terminals that feature DTMF dialling and a flash func- tion.

  • Page 21: Connecting The Eumex 704Pc Lan To The Power Supply

    All manuals and user guides at all-guides.com Connecting Devices Connecting the Eumex 704PC LAN to the Power Supply Connection to the 230V mains supply is not dangerous, providing you adhere strictly to the following instructions. Danger! Under no circumstances should you commission or continue operating the device if the AC adapter is damaged.

  • Page 22: Sockets

    All manuals and user guides at all-guides.com Connecting Devices Sockets The operation of a communications system can be impaired by interference in the power supply caused by other equipment, especially photocopiers, laser printers, electric typewriters, air conditioning, fan heaters, vacuum cleaners and refrigerators. For this reason, please: •...

  • Page 23: Additional Terminals On The S 0 Bus

    All manuals and user guides at all-guides.com Connecting Devices Additional Terminals on the S 0 Bus Besides the Eumex 704PC LAN, you can operate additional ISDN terminals (e.g. ISDN telephones) on the NTBA. To simplify the connection of additional devices, you will find an external S 0 port on the lower side of the Eumex 704PC LAN.

  • Page 24: Setting The Dialling Mode For The Analogue Terminals

    All manuals and user guides at all-guides.com Connecting Devices • USB on: the USB interface to the connected PC is busy. • USB flickers: data is being transferred to the connected PC. • LAN 1 on: there is a connection to the connected PC. •...

  • Page 25: Commissioning

    All manuals and user guides at all-guides.com Commissioning The Eumex 704PC LAN Default Settings on Delivery The following default settings and features are active on delivery: • The PIN is set to "0000." • External incoming calls are signalled on all connected terminals. •...

  • Page 26: Accepting Calls

    All manuals and user guides at all-guides.com Telephoning In order for you to be able to use all the features provided by your telecommunica- tions system, the terminals must be set to DTMF dialling with a flash function. Termi- nals with pulse dialling cannot perform functions requiring the R-key, the star or the hash keys.

  • Page 27: Making Internal Calls

    All manuals and user guides at all-guides.com Telephoning Making Internal Calls An internal call is a call made to another subscriber on the same Eumex 704PC LAN. Automatic external line seizure (the default setting on delivery): Lift the handset. You hear an external dialling tone. Press the R-key.

  • Page 28: Making Calls Using Speed Dialling

    All manuals and user guides at all-guides.com Telephoning Making Calls Using Speed Dialling The Eumex 704PC LAN saves up to 100 speed-dialling numbers (or "destinations"). Every internal subscriber can be granted the right to use these speed-dialling num- bers. (You edit the relevant settings in the configuration mode.) Lift the handset.

  • Page 29: Transferring Calls Without An Announcement

    All manuals and user guides at all-guides.com Telephoning Gespräch weitergeben Transferring Calls without an Announcement Let’s say you want to transfer a call internally or externally. Dial the internal sub- scriber’s number or 0 and the external number, then replace the handset. The sub- scriber’s telephone signals the call.

  • Page 30: Transferring Calls With An Announcement

    All manuals and user guides at all-guides.com Telephoning Gespräch weitergeben Transferring Calls with an Announcement You want to transfer a call internally or externally, but you first want to speak to the other subscriber. You are having a conversation. Press the R-key. You hear the internal dialling tone. c r t Dial the internal number or 0 followed by the external number.

  • Page 31: Speaking With Two Subscribers Alternately (Toggling)

    All manuals and user guides at all-guides.com Telephoning Speaking with Two Subscribers Alternately (Toggling) Using the Eumex 704PC LAN you can toggle between two subscribers, i.e. speak to them alternately. They can be internal or external subscribers. External subscribers who are on hold hear an announcement from the exchange. You are having a conversation and want to make an enquiry call to a second sub- scriber.

  • Page 32: Speaking With Two Subscribers Simultaneously (3-Party Conference)

    All manuals and user guides at all-guides.com Telephoning Speaking with Two Subscribers Simultaneously (3-party Conference) Used on a multi-terminal connection the Eumex 704PC LAN enables two 3-party con- ferences to be held simultaneously. One internal and two external subscribers can participate in a conference.

  • Page 33: Picking Up Calls

    All manuals and user guides at all-guides.com Telephoning Picking up Calls You can pick up an external call signalled on another terminal on the Eumex 704PC LAN: Lift your handset. Select the code digit 4. Press the R-key first in the case of automatic external line seizure.

  • Page 34: Automatic Callback On No Reply (Ccnr)

    All manuals and user guides at all-guides.com Telephoning * 3 7 press the star key, select 37, then press the hash key. On some telephones, this sequence is pre-programmed for a single key. You hear a positive acknowledgement tone. Replace the handset. As soon as the called subscriber is free again, you will receive the callback.

  • Page 35: Dtmf Post-Dialling

    Press the R-key, then the hash key, and dial 0. Calling Your T-NetBox If you have a T-NetBox from Deutsche Telekom, saved messages or incoming faxes are signalled by the "Message" LED (see the note on p. 53). Please refer to the T-Net- Box User Guide for instructions on how to retrieve information.

  • Page 36: Staying In Touch

    All manuals and user guides at all-guides.com Staying in Touch Call Forwarding You can forward calls from an internal to an external terminal, or from one internal to another internal terminal. Depending on the configuration, the call is forwarded in the Eumex 704PC LAN or in the exchange (where a charge is incurred).

  • Page 37: Deactivating Call Forwarding

    All manuals and user guides at all-guides.com Staying in Touch • "Immediately": code digits 21 • "After a set time": code digits 61 • "On busy": code digits 67. Press the star key. Enter the call forwarding destination number: an internal number (only if call forward- ing in the Eumex 704PC LAN is active), or an external number without a leading 0 for the manual external line seizure.

  • Page 38: Accepting Or Rejecting Call Waiting

    All manuals and user guides at all-guides.com Staying in Touch Accepting or Rejecting Call Waiting You are having a conversation and an external subscriber calls. The call is signalled on your terminal by means of a call-waiting tone. Internal callers always hear a busy tone when you are having a conversation.

  • Page 39: Activating Call-Waiting Protection

    All manuals and user guides at all-guides.com Staying in Touch Activating Call-waiting Protection If you want to have a conversation without being disturbed by any further callers, you can activate call-waiting protection for the line to which your terminal is connected. Any further callers then hear a busy tone.

  • Page 40: Charge Accounts

    Discounts, special rates and premium services can lead to dis- crepancies between the data saved in the communications system and the telephone bill. Please refer to Deutsche Telekom’s terms of business for the conditions applying to the transmission of charge information.

  • Page 41: Configuration Via Telephone

    All manuals and user guides at all-guides.com Configuration via Telephone You can edit the presettings and configure the Eumex 704PC LAN according to your personal requirements. There are three ways of doing this: you can use a PC and menus (see the chapter entitled "Configuring the System" on p. 66), a connected tele- phone (only possible with DTMF telephones), or the remote TeleService (0180 2 55 66 55).

  • Page 42: Starting The Configuration Mode

    All manuals and user guides at all-guides.com Configuration via Telephone Starting the Configuration Mode To start the configuration mode: Lift the handset. Press the R-key (only in the case of automatic external line access). You hear an internal dialling tone. Select the code digit 8.

  • Page 43: Editing The Pin

    All manuals and user guides at all-guides.com Configuration via Telephone Editing the PIN You require a personal identification number (PIN) to start the configuration mode. The default setting on delivery is 0000. We recommend you to change this PIN and keep the new one in a safe and secret place.

  • Page 44: Storing Telephone Numbers (Msns)

    In order for incoming calls to be signalled on specific terminals, you have to save the MSNs allocated to you by Deutsche Telekom in the Eumex 704PC LAN. The MSNs are saved without an area code. Please make a note of the saved MSNs in the table on p.

  • Page 45: Call Assignment

    All manuals and user guides at all-guides.com Configuration via Telephone Call Assignment In order for incoming calls to be signalled on specific terminals, you have to program call assignment. Here you specify which terminal rings when a certain MSN is called. You do this by assigning every external number (MSN) to one or more internal lines, which then signal the call.

  • Page 46: Resetting The Call Assignment

    All manuals and user guides at all-guides.com Configuration via Telephone Reset the Call Assignment To reset the call assignment, proceed as follows: Lift the handset. The configuration mode is active and you hear a special internal dialling tone. 9 0 5 Select the code digits 905.

  • Page 47: Manual External Line Seizure With 0

    All manuals and user guides at all-guides.com Configuration via Telephone Manual External Line Seizure with 0 When this setting is active, you have to dial 0 before dialling an external number. Lift the handset. The configuration mode is active and you hear a special internal dialling tone.

  • Page 48: Number Busy

    All manuals and user guides at all-guides.com Configuration via Telephone Number Busy With this setting you can specify whether incoming calls for an MSN during an exter- nal call are signalled as call waiting by ringing on other telephones, or whether the caller hears a busy tone.

  • Page 49: Configuring The Device Type For The Internal Lines

    All manuals and user guides at all-guides.com Configuration via Telephone Configuring the Device Type for the Internal Lines You can configure a device type (e.g. fax, answerphone) for every internal line so that the Eumex 704PC LAN can manage the respective devices correctly. This ensures that fax transmissions are not interrupted by call-waiting tones, for instance.

  • Page 50: External Line Access

    All manuals and user guides at all-guides.com Configuration via Telephone External Line Access You can set external line access to one of five levels for every internal line. If a sub- scriber dials an external number for which that line has no access rights, he hears the busy tone.

  • Page 51: Storing Emergency Numbers

    All manuals and user guides at all-guides.com Configuration via Telephone Storing Emergency Numbers Your Eumex 704PC LAN can save up to three emergency numbers. These numbers can always be dialled from every telephone, independent of the external line access rights that otherwise exist. You save the emergency numbers as follows: Lift the handset.

  • Page 52: Deleting Individual/All Speed-Dialling Numbers

    All manuals and user guides at all-guides.com Configuration via Telephone Storing Numbers for Speed Dialling Your Eumex 704PC LAN can save up to 100 telephone numbers, which you can then dial conveniently using the speed-dialling code digits 00 to 99. Lift the handset.

  • Page 53: Blocking/Releasing Speed Dialling For Internal Lines Without External Line Access.45

    All manuals and user guides at all-guides.com Configuration via Telephone Blocking/Releasing Speed Dialling for Internal Lines without External Line Access Internal lines with outward restricted or no external line access can (in the default set- ting) can still use speed-dialling numbers to dial destinations falling outside their external line access levels.

  • Page 54: Programming A Telephone Number (Msn) For Transmission

    Replace the handset. Always Call Anonymously (Restrict Telephone Number) If this service has been ordered from Deutsche Telekom, you can prevent your telephone number (MSN) from being shown on the telephone of the external subscriber you have called. You must program this setting for each internal number (11 - 14) individually.

  • Page 55: Always Transmit Number (Restrict Telephone Number: Cancel)

    All manuals and user guides at all-guides.com Configuration via Telephone Always Transmit Number (Restrict Telephone Number: Cancel) You can only cancel the restriction of the telephone number display for all lines simul- taneously: Lift the handset. The configuration mode is active and you hear a special internal dialling tone.

  • Page 56: Charge Per Unit Of Time

    All manuals and user guides at all-guides.com Configuration via Telephone Charge per Unit of Time Enter the charge per unit of time for call-charge registration in cents, e.g. 0006 (the default setting is 0.06 euros). You can edit the currency under "CAPI-Control\Einstel- lungen (Settings)\Gebühreneinstellungen (Charge settings)\Währung (Currency)."...

  • Page 57: Setting A Charge Limit

    All manuals and user guides at all-guides.com Configuration via Telephone Setting a Charge Limit You can set a charge limit (charge account) for every internal line, which you can then activate and deactivate as the need arises. When the limit has been reached, no fur- ther outgoing external calls are possible on this line (the subscriber hears a busy tone).

  • Page 58: Managing Call Forwarding

    Eumex 704PC LAN (= the default setting) or in the telephone exchange. Both proce- dures have certain advantages. Call forwarding in the exchange must be ordered from Deutsche Telekom. Call forwarding in the exchange forwards the MSN assigned to the telephone that activated call forwarding.

  • Page 59: Deleting All Call Forwarding

    All manuals and user guides at all-guides.com Configuration via Telephone Deleting All Call Forwarding You can use the following procedure to delete all call forwarding: Lift the handset. The configuration mode is active and you hear a special internal dialling tone. 9 0 6 Select the code digits 906.

  • Page 60: Activating/Deactivating Call Transfer (Ect)

    All manuals and user guides at all-guides.com Configuration via Telephone Activating/Deactivating Call Transfer (ECT) If the ISDN service ECT is available in the exchange, you can activate and deactivate it as required: Lift the handset. The configuration mode is active and you hear a special internal dialling tone.

  • Page 61: Activating/Deactivating T-Netbox Signalling

    All manuals and user guides at all-guides.com Configuration via Telephone Activating/Deactivating T-NetBox Signalling You can activate and deactivate the LED ("Message" LED) that signals messages wait- ing and faxes received: Lift the handset. The configuration mode is active and you hear a special internal dialling tone.

  • Page 62: Sms In A Fixed-Line Network

    All manuals and user guides at all-guides.com Configuration via Telephone SMS in a Fixed-line Network Your Eumex 704PC LAN supports the "SMS in a fixed-line network" function. This function can only be used on analogue telephones that explicitly support the "SMS in a fixed-line network"...

  • Page 63: Resetting The Communications System

    All manuals and user guides at all-guides.com Configuration via Telephone SMS Service Centre number The Deutsche Telekom SMS Service Centre number is 0193 0100. Notes on the line configured for SMS When calls from the SMS provider are forwarded to the 704PC LAN SMS line,...

  • Page 64: Remote Configuration

    All manuals and user guides at all-guides.com Remote Configuration Fernkonfiguration Remote Configuration If you decide not to configure your Eumex 704PC LAN yourself, you can have it con- figured remotely by TeleService for a fee. Call TeleService for advice, and list your configuration requirements.

  • Page 65: The Pc Software

    All manuals and user guides at all-guides.com The PC Software General The communications software supplied enables you to use the ISDN data transfer serv- ice, class 3 and 4 fax and e-mail transmission and reception, a mailbox, an answer- phone function and Internet applications on up to four PCs via the USB or one of the Ethernet 10BaseT ports.

  • Page 66: System Prerequisites

    All manuals and user guides at all-guides.com The PC Software System Prerequisites The system prerequisites for the installation of the Eumex 704PC LAN software on your PC are as follows: • IBM-compatible PC with a hard-disk and CD-ROM drive • CPU speed of 233 MHz or faster •...

  • Page 67: About The Software

    All manuals and user guides at all-guides.com The PC Software About the Software On the CD-ROM supplied you will find the following software: • The Eumex 704PC LAN system software contains the software necessary for operating the Eumex 704PC LAN including the CAPI, CAPI Port, CAPI Control and TAPI drivers, as well as the configuration program for programming the com- munications system..

  • Page 68: Installing The Software

    All manuals and user guides at all-guides.com Installing the Software Installing the Software and Configuring Internet Access Before installing the software, you must ensure that any existing ISDN instal- lation on your PC is deactivated or uninstalled. No other CAPI drivers must be installed, because this could result in conflicts between the various CAPI drivers.If you want to connect more than one PC to your Eumex 704PC LAN after installing the software on the first PC, you must run the "Expressinstalla-...
  • Page 69 All manuals and user guides at all-guides.com Installing the Software 4. In the subsequent dialogue you select the Eumex 704PC LAN CD-ROM. Note The above installation screens will only appear if you connected your PC directly to the Eumex 704PC LAN via the USB port before installing the software. If the connection is via Ethernet, or if the PC has not yet been connected, the following screen will appear.
  • Page 70 All manuals and user guides at all-guides.com Installing the Software Follow the instructions in the installation program. If the installation wizard reports finding newer files, please do not overwrite them. To connect your PC to the Eumex 704PC LAN, select the desired port. Please note that your PC must have a network card in order to be able to connect to a LAN port on the Eumex 704PC LAN.
  • Page 71 All manuals and user guides at all-guides.com Installing the Software 7. Depending on the following selection ("T-Online" or "Anderer Internet Service Provider" (Other ISP)), an input screen may open in which you enter the access data obtained from your provider. The input field names correspond to the expressions used in the respective docu- mentation.
  • Page 72 All manuals and user guides at all-guides.com Installing the Software 8. Follow the instructions in the configuration program. 9. On completion of the program, the access data is saved to the Eumex 704PC LAN. When you now start an Internet browser (such as Netscape Communicator or Microsoft Internet Explorer), you will automatically be connected to the Inter- net.

  • Page 73: Connecting To / Disconnecting From The Internet

    All manuals and user guides at all-guides.com Connecting to / Disconnecting from the Internet Connecting to the Internet Whenever a Web browser (e.g. Internet Explorer or Netscape Communicator) or an e- mail client is started on any one of the PCs connected to the Eumex 704PC LAN, a connection to the Internet is established automatically.

  • Page 74: Configuring The System

    All manuals and user guides at all-guides.com Configuring the System Configuring the Eumex 704PC LAN Start the configuration software to edit the many Eumex 704PC LAN settings. Access to the configuration program is PIN-protected. In the default setting on deliv- ery, this PIN is 0000 (i.e.

  • Page 75: Menu: External Isdn / Telephone Numbers

    All manuals and user guides at all-guides.com Configuring the System Menu: External ISDN / Telephone numbers Type in the telephone numbers (MSNs) assigned to you for your ISDN connection by Deutsche Telekom, without an area code. Storing telephone numbers (MSNs).

  • Page 76: Menu: Call Assignment / Incoming

    For correct operation of this service, the SMS Service Centre telephone number must be configured and the SMS call assigned to the desired analogue line. Enter the Deutsche Telekom SMS Service Centre number (01930100) and select the analogue line on which you want to operate your SMS-capable telephone.

  • Page 77: Menu: Internal Subscribers

    All manuals and user guides at all-guides.com Configuring the System Menu: Internal subscribers Settings You can edit various settings for each connected device. When the device is selected, the optimum settings for the respective device type will be selected automatically (e.g.
  • Page 78 All manuals and user guides at all-guides.com Configuring the System Call Forwarding The call forwarding input screen depends on the type of call forwarding selected ("in the exchange" or "in the communications system"). Call forwarding in the communications system (Anrufweiterschaltung in der Anlage) When calls are to be forwarded in the communications system, you specify a call for- warding destination for incoming calls to each of the connected terminals.
  • Page 79 All manuals and user guides at all-guides.com Configuring the System Call forwarding in the exchange When calls are to be forwarded in the exchange, you specify a call-forwarding desti- nation for incoming calls to each of the entered MSNs. As opposed to call forwarding in the communications system, the connection is not busy for the duration of call for- warding, and the other MSNs can be called.

  • Page 80: Menu: Central Data

    All manuals and user guides at all-guides.com Configuring the System Menu: Central data Settings Here you can edit your communications system settings. These settings apply to all connected devices. Please note In order for messages waiting in your T-NetBox to be indicated, the ISDN "MWI" service must be available for your ISDN connection.
  • Page 81 All manuals and user guides at all-guides.com Configuring the System Emergency numbers The emergency numbers entered here can always be dialled, regardless of the exter- nal line access levels (see the "Teilnehmer intern / Einstellungen" (Internal sub- scribers / Settings) menu on p. 69).

  • Page 82: Menu: Charges

    All manuals and user guides at all-guides.com Configuring the System Menu: Charges Summary In this screen you can see the charges incurred by a specific MSN in the left-hand col- umn, and the charges incurred by for a specific terminal in the right-hand one. You can edit the factor, read out the current status from the communications system, or reset the counter.
  • Page 83 All manuals and user guides at all-guides.com Configuring the System Call data records Call data records consist of information about the device (line), the busy telephone number (MSN), the beginning and the end of the call, the telephone number called and the charges incurred.

  • Page 84: Menu: Speed Dialling / Settings

    All manuals and user guides at all-guides.com Configuring the System Menu: Speed dialling / Settings The communications system can save up to 100 telephone numbers (00 - 99) as speed-dialling codes. Depending on speed-dialling rights (see the "Teilnehmer intern / Einstellungen" (Internal subscribers / Settings) menu on p. 69), connected termi- nals can be used to call the speed-dialling destinations by means of the correspond- ing codes in the left-hand column.Deleting individual/all speed-dialling number mem- ory locations...

  • Page 85: Menu: Network / Router Configuration

    All manuals and user guides at all-guides.com Configuring the System Menu: Network / Router configuration Here you can enter the data for Internet access via the router. On your monitor (as opposed to the diagram), the corresponding fields are filled in. This is the data you entered on installation.

  • Page 86: Starting A Program From The Windows Taskbar

    All manuals and user guides at all-guides.com Starting a Program from the Windows Taskbar Starting a Program from the Windows Taskbar In the lower right-hand corner of the Windows taskbar you find the depicted icon in the form of an LED for each of the B-channels. The colour of the LEDs indicates the CAPI status.

  • Page 87: Capi Control

    All manuals and user guides at all-guides.com CAPI Control CAPI Control The CAPI Control program provides you with comprehensive information about an existing connection, and enables you to edit a number of CAPI settings. Windows starts this program automatically, and you can invoke it via the taskbar. For further information about each of the available tabs, click on the Help button.

  • Page 88: Flashload

    All manuals and user guides at all-guides.com FlashLoad FlashLoad (Updating the Communications System Software) You can update your Eumex 704PC LAN system software yourself. This may be nec- essary when new features become available. You can download the newest version from the Internet under the following address: http://www.telekom.de/faq, where you click on "Endgeräte und Downloads"...
  • Page 89 All manuals and user guides at all-guides.com FlashLoad Select the system software to be loaded and open this file. You see the software ver- sion information. When you use the FlashLoad feature for the first time, your PC operating system will install the necessary software modules.
  • Page 90 All manuals and user guides at all-guides.com FlashLoad Before the upload procedure begins, the screen depicted opens with important infor- mation about what to do during this procedure. A monitoring screen keeps you informed about the current status of the upload. When the data transfer is complete, the program is automatically terminated, and the Eumex 704PC LAN restarts.

  • Page 91: Teledat Rvs-Com

    All manuals and user guides at all-guides.com Teledat RVS-COM Basic Functions The RVS-COM communications software enables you to emulate a fax machine, an answerphone or a terminal on your PC. The prerequisite for installation is that you have already installed the CAPI (Common ISDN Application Programming Interface) with the Eumex 704PC LAN system soft- ware.
  • Page 92 All manuals and user guides at all-guides.com Teledat RVS-COM 3. RVS Telefon acts as an ISDN telephone with answerphone on your PC. To use this function, your PC must have a full-duplex soundcard. 4. RVS Terminal is a terminal emulation enabling your PC to establish connections to ISDN mailboxes.

  • Page 93: Winphone

    All manuals and user guides at all-guides.com WinPhone Basic Functions The convenient dialling wizard enables you to plan and log telephone calls using a subscriber database. If a caller’s number is transmitted, he/she can be identified by means of the entry in this database. User Interface For further information, please refer to the comprehensive help file ("Hilfe"...

  • Page 94: Pagemobil

    All manuals and user guides at all-guides.com PageMobil Basic Functions PageMobil is a program that enables you to send short messages. User interface For further information, please refer to the comprehensive help file ("Hilfe" (Help) menu item and the on-line help).

  • Page 95: Home Network

    All manuals and user guides at all-guides.com Home Network Installation The installation of the Eumex 704PC LAN system software fulfils all the prerequisites for network operation. Every PC connected to the system can be accessed as a net- work PC and can, in turn, access the other PCs in the network or their hard disk drives if this is not restricted by personal settings.

  • Page 96: Data Transfer (Sharing And Mapping Drives)

    All manuals and user guides at all-guides.com Home Network Data Transfer (Sharing and Mapping Drives) Sharing a Drive In order to share a drive (e.g. a partition of your hard disk or a built-in ZIP drive), click on that drive with the right-hand mouse button, select the "Sharing" tab, and grant the rights as desired.
  • Page 97 All manuals and user guides at all-guides.com Home Network Displaying the Network Neighbourhood Double-click the "Network Neighbourhood" symbol on your PC desktop to display all available PCs and their shared drives. Finding a Specific PC in the Network You can find a specific PC in the network by invoking a dialogue via the "Find/Com- puter"...

  • Page 98: The Web Configurator

    All manuals and user guides at all-guides.com The Web Configurator Starting the Web Configurator The Web Configurator enables you to edit settings on the Eumex 704PC LAN using operating systems other than Windows. If the necessary requirements are met, you can edit some of the settings using a sim- ple Web browser (Microsoft Internet Explorer, version 4.0 and up is recommended) running under Linux or Mac OS.

  • Page 99: Isdn - Basic Settings

    All manuals and user guides at all-guides.com The Web Configurator You open the topics listed on the left-hand side by clicking on them and can then edit the settings. When you have completed editing the settings, please click on the "Änderungen aktivieren"...

  • Page 100: T-Dsl Access Data

    All manuals and user guides at all-guides.com The Web Configurator T-DSL Access Data Click on "T-DSL Zugangsdaten" (T-DSL access data) to open the screen depicted. If access data has already been saved to the Eumex 704PC LAN, it will appear in the respective fields.

  • Page 101: Isdn Access Data

    All manuals and user guides at all-guides.com The Web Configurator ISDN Access Data Click on "ISDN Zugangsdaten" (ISDN access data) to open the screen depicted. If access data has already been saved to the Eumex 704PC LAN, it will appear in the respective fields.

  • Page 102: Ppp Settings

    All manuals and user guides at all-guides.com The Web Configurator PPP Settings Click on "PPP Einstellungen" (PPP settings) to open the screen depicted. If settings have already been made in the Eumex 704PC LAN (the diagram shows the default values), they will appear in the respective fields. You can edit the settings and save them to the Eumex 704PC LAN by clicking on the "Speichern"...

  • Page 103: Filter

    All manuals and user guides at all-guides.com The Web Configurator Filter Click on "Filter" to open the screen depicted. If settings have already been made in the Eumex 704PC LAN (the diagram shows the default values), they will appear in the respective fields.

  • Page 104: Router Configuration

    All manuals and user guides at all-guides.com The Web Configurator Router Configuration Click on "Routerkonfiguration" (Router configuration) to open the screen depicted. If settings have already been made in the Eumex 704PC LAN (the diagram shows the default values), they will appear in the respective fields. You can edit the configuration data and save it to the Eumex 704PC LAN by clicking on the "Speichern"...

  • Page 105: Status

    All manuals and user guides at all-guides.com The Web Configurator Status Click on "Status" to open the screen depicted. You can edit the data and save it to the Eumex 704PC LAN by clicking on the "Speichern" (Save) button.

  • Page 106: Appendix

    All manuals and user guides at all-guides.com Appendix Technical Specifications Mains power supply 230 VAC ; 50 Hz for the AC adapter Rated power 23 W Safety class 1 x Euro-ISDN external for the basic connection (looped through) DSS1 protocol Supply voltage 40 V ±...

  • Page 107: Glossary

    All manuals and user guides at all-guides.com Appendix Glossary 3-party conference A call with one internal and two external subscribers. 10BaseT This is an Ethernet connection with a transfer rate of 10 Mbit/s. The connection is via twisted-pair cable. ADSL Stands for Asymmetric Digital Subscriber Line This is a transfer technology that uses the conventional copper-cable network to realise broadband data connections.
  • Page 108 This is an ISDN feature transmitting the caller’s number to the called subscriber, where it appears on his display. CLIR (Calling line identification restriction) If this service has been ordered from Deutsche Telekom, you can restrict the display of your MSN at the called subscriber. Communications system Communications systems are private branch exchanges (e.g.
  • Page 109 0. This means that when you want to make an external call and you lift the handset, you hear an external dialling tone either immediately or after dialling 0. This is a unit consisting of the socket and plug for connecting ISDN devices in Deutsche Telekom’s ISDN. ISDN ISDN stands for "Integrated Services Digital Network."...
  • Page 110 All manuals and user guides at all-guides.com Appendix ISDN socket The standardised socket for connecting ISDN devices in Deutsche Telekom’s ISDN. Light emitting diode: an electronic component for visual signalling. MCID (Malicious Call Identification) An ISDN feature enabling malicious callers to be identified in the telephone exchange.
  • Page 111 All manuals and user guides at all-guides.com Appendix This stands for "point-to-point protocol," a network protocol used for connecting to the Internet via a modem. Pulse dialling A dialling procedure in which the dialling signals are transmitted in the form of electri- cal impulses, as used by telephones with rotary dialling disks, for instance.
  • Page 112 All manuals and user guides at all-guides.com Appendix T-NetBox Digital answerphone with a fax buffer in Deutsche Telekom’s telephone network. The Eumex 704PC LAN signals messages waiting in the T-NetBox. Toggle Switching back and forth between two calls. You can accept incoming calls even though you are already making a call, or have an enquiry call with other participants involved in the call.

  • Page 113: Audio Signals / Ringer Cadences

    All manuals and user guides at all-guides.com Appendix Audio Signals / Ringer Cadences The following diagram shows the duration and intervals of the individual audio sig- nals and ringer cadences. Audio signals Time in seconds Ring tone Busy tone Internal dialling tone External dialling tone Positive acknowledgement tone Negative acknowledgement tone...

  • Page 114: Index Of Key Words

    All manuals and user guides at all-guides.com Appendix Index of Key Words 3-party conference........24 Class of service........42 Communications software....57 Configuration mode .......34 Anonymous calls........46 Configuring the Eumex 704PC LAN..66 Answerphone call........25 Conformity, declaration of ....108 Audio tones..........105 Connecting..........10 Connecting to the Internet ....65 Automatic and manual external line seizure ............18 Currency, changing the ...48, 74, 79...
  • Page 115 All manuals and user guides at all-guides.com Appendix RVS Fax .............83 Malicious call identification (MCID)..27 RVS SMS...........84 Manual external line seizure....39 RVS Telefon..........84 Mapping and sharing drives....88 RVS Terminal..........84 MCID............27 RVS TransferMaster........83 Menu: Rufzuordnung / kommend RVS VideoPhone ........84 (Call assignment / Incoming)....68 Menu: Zentrale Daten (Central data) ..72 Menu: Entgelte (Charges) ....74 Safety precautions........4...

  • Page 116: Declaration Of Conformity

    D-48565 Steinfurt Returning Old Communications Systems You can return decommissioned communications systems that have been purchased or leased from Deutsche Telekom free of charge to any T-Punkt, where they will be professionally dismantled and recycled. Returning Your Old CD-ROM When you no longer require it, you can return your CD-ROM free of charge to any T- Punkt, where it will be recycled.
  • Page 117 Appendix If repairs are unsuccessful, the purchaser may either request a reduction in the pur- chase price or rescind the contract and, insofar as Deutsche Telekom is accountable for the defects, demand compensation. The purchaser shall report any ascertained defects to Deutsche Telekom without delay.

  • Page 118: Dealing With Faults

    All manuals and user guides at all-guides.com Appendix Dealing with Faults If your system does not function as desired, first try getting it to work with the help of the table below. The following notes are designed to help you deal with the fault yourself: Problem Possible cause Solution...

  • Page 119: Customer Service

    (You will find this number on the base of the housing.) If you suspect that your ISDN connection is faulty, please contact your network provider’s Customer Service department. Deutsche Telekom’s freephone T-Service number is 0800 330 2000.
  • Page 120 All manuals and user guides at all-guides.com Important telephone numbers In case of faults: Sales enquiries: Please enter the telephone number when handing over the device. Published by: Deutsche Telekom AG Right to changes reserved. As of: 16.08.2002...

Table of Contents