Cassette Tape Playback - Toshiba MW26H82 Owner's Manual

Cassette tape playback

To play a prerecorded tape.
Playback
1
Load a prerecorded tape:
(When loading a cassette tape without the erase
prevention tab, playback will start automatically).
2
To start playback:
Press PLAY on the front panel or on
the remote control.
Playback will start. "
on the screen for about 4 seconds.
To stop playback:
Press STOP/EJECT once on the
front panel or press STOP on the
remote control.
The tape will stop but remain fully
loaded and ready to play.
" " will appear on the screen for
about 4 seconds.
Notes:
• If you play a prerecorded tape after the DVD playback, you
must set the unit to TV/VCR mode using the TV/VCR button.
• This unit selects the playback tape speed SP or SLP auto-
matically.
• When you select the TV/VCR mode during DVD playback, DVD
playback will change to the still mode, and after 5 minutes it
will change to the resuming playback mode automatically.
5V90101A [E]p46-51
REW PLAY
" will appear
47
FF
STOP/EJECT
Rewind or forward the tape
Stop the playback or recording with STOP.
To rewind the tape:
Press REW on the front panel or press
REV on the remote control.
To forward the tape:
Press FF on the front panel or press
FF on the remote control.
To stop the tape-winding, press STOP. To switch to play-
back directly (without STOP), press PLAY.
Forward/Reverse picture search mode
When the tape is being winded, you can switch to picture
search mode (see page ). To do this, press REV or FF
48
again and hold it down. The unit will resume the tape
winding as soon as the button is released.
8/4/06, 5:46 PM
TV/VCR
PLAY
STOP
FF
REV
47