Cassette Tape Playback - Toshiba MW20FP1 Owner's Manual

Playback (VCR)

Cassette tape playback

To play a prerecorded tape.
Playback
1
Load a prerecorded tape:
(When loading a cassette tape without the erase
prevention tab, playback will start automatically).
2
To start playback:
Press PLAY on the front panel or on
the remote.
Playback will start. "
on the screen for about 4 seconds.
PLAY
To stop playback:
Press STOP/EJECT once on the front
panel or press STOP on the remote.
The tape will stop but remain fully
loaded and ready to play.
"
about 4 seconds.
STOP
Notes:
• If you play a prerecorded tape after the DVD playback, you
must set the unit to TV/VCR mode using the TV/VCR button.
• This unit selects the playback tape speed SP or SLP auto-
matically.
• When you select the TV/VCR mode during DVD playback, DVD
playback will change to the still mode, and after 5 minutes it
will change to the resuming playback mode automatically.
34
5L00201C [E]p33-37
" will appear
" will appear on the screen for
34
Illustration of MW20FP1
Rewind or forward the tape
Stop the playback or recording with STOP.
To rewind the tape:
Press REW on the front panel or press
REV on the remote.
REV
To forward the tape:
Press FF on the front panel or press
FWD on the remote.
FWD
To stop the tape-winding, press STOP. To switch to play-
back directly (without STOP), press PLAY.
Forward/Reverse picture search mode
When the tape is being winded, you can switch to picture
search mode (see next page). To do this, press REV or
FWD again and hold it down. The unit will resume the
tape winding as soon as the button is released.
20/4/04, 16:06
TV/VCR
REV
PLAY
FWD
STOP