Advertisement
PT BLASTER
PORTABLE TIRE BEAD SEATER
Stock Number W10012
WARNING!
It is the owner and/or operators' responsibility to study all WARNINGS, operating, and maintenance instructions
contained on the product label and instruction manual prior to operation of this bead seater. The owner/operator shall
retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning labels and while in use,
maintaining the unit in good working order. If the owner and/or operator are not fluent in English, the product warnings
and instructions shall be read and discussed in the operators' native language by the purchaser/owner or his
designee. Make sure that the operator comprehends its contents. Safety information shall be emphasized and
understood prior to usage. The tool shall be inspected per the operating instructions.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
If you encounter any problems or difficulties, please contact our customer service department at: 1-800-426-1262
between 6:30 a.m. and 4:30 p.m. Pacific time.
On occasion, after printing of our literature is completed, our manufacturers may make changes and/or modifications to merchandise which will not be reflected
in this manual. Although we strive to maintain complete and accurate information, it is possible in some instances, that the product may differ slightly from
printed specifications. Illustrations are intended for reference only. Actual merchandise may vary. Wilmar is not responsible for typographical errors.
OWNERS MANUAL
Please read these instructions carefully and retain them for future use.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Performance Tool PT BLASTER
Summary of Contents for Performance Tool PT BLASTER
- Page 1 PT BLASTER PORTABLE TIRE BEAD SEATER Stock Number W10012 OWNERS MANUAL WARNING! It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product label and instruction manual prior to operation of this bead seater. The owner/operator shall retain product instructions for future reference.
- Page 2 10. Only qualified persons may install, operate, adjust, maintain, clean, repair, inspect, or transport this tool. Always transport empty. 11. Inspect the condition of your PT Blaster before each use; do not use if damaged, altered, or in poor condition. 12. Wear ear and eye protection that meet ANSI and OSHA standards.
- Page 3 ASSEMBLY Most of your PT Blaster has been preassembled at the factory. Be sure to use PFTE (thread sealing) tape on the balance of threaded items left to assemble. To install the Discharge Valve and Threaded Barrel use a pipe wrench, tighten so there are no air leaks.
- Page 4 90 days from the date of purchase, provided that product is returned to place of purchase immediately after discovery of defect. After 90 days and up to one year from date of purchase, PERFORMANCE TOOL® will replace at no charge any parts which our examination shall disclose to be defective and under warranty.
Need help?
Do you have a question about the PT BLASTER and is the answer not in the manual?
Questions and answers