Performance Tool W50076 Owner's Manual

Performance Tool W50076 Owner's Manual

Electric heat gun

Advertisement

Quick Links

1 YEAR LIMITED WARRANTY
PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These warranties give specific legal
rights. Except where prohibited by local law, the law of the State of Washington governs all warranties and all exclusions and limitations of
warranties and remedies. There may be other rights which vary from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under normal use and service. A
defective product may be returned for a free replacement within 90 days from the date of purchase, provided that product is returned to
place of purchase immediately after discovery of defect. After 90 days and up to one year from date of purchase, PERFORMANCE TOOL®
will replace at no charge any parts which our examination shall disclose to be defective and under warranty. These warranties shall be valid
only when a sales receipt showing the date of purchase accompanies the defective product or defective part(s) being returned. For part(s)
after 90 days, please remit your request, postage prepaid to:
PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be replaced under normal
use and service. These warranties shall not apply to any product or part which is used for a purpose for which it is not designed, or which
has been repaired or altered in any way so as to affect adversely its performance or reliability, nor shall these warranties apply to any
product or part which has been subject to misuse, neglect, accident or wear and tear incident to normal use and service.
PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in connection with its
products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL® makes no express or implied
warranties of any kind with respect to its products. In particular, PERFORMANCE TOOL® makes no implied warranty of merchantability
and no implied warranty of fitness for any particular purpose, except that for goods purchased primarily for personal, family or household
use and not for commercial or business use, PERFORMANCE TOOL® makes an implied warranty of merchantability (and, if otherwise
applicable, an implied warranty of fitness for a particular purpose), but only for the particular qualities or characteristics, and for the
duration, expressly warranted above. The laws on limitation of implied warranties may differ from state to state, so the above limitations
may not apply in all cases.
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages resulting from or in any manner related to any
product, or to the design, use, or any inability to use the product. The sole and exclusive remedy for a defective product or part shall be
the repair, or replacement thereof as provided above. The laws on limitation of remedies or on consequential, incidental or special
damages may vary from state to state, so the above limitations may not apply in all cases.
© Copyright 2016 WILMAR CORPORATION, P.O. Box 88259 Tukwila, WA 98138

Advertisement

Table of Contents
loading

Summary of Contents for Performance Tool W50076

  • Page 1 90 days from the date of purchase, provided that product is returned to place of purchase immediately after discovery of defect. After 90 days and up to one year from date of purchase, PERFORMANCE TOOL®...
  • Page 2 ELECTRIC HEAT GUN Stock Number W50076 OWNERS MANUAL 5002889 WARNING It is the owner and/or operators’ responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product label and instruction manual prior to operation of this product. The owner/operator shall retain product instructions for future reference.
  • Page 3: Safety Guidelines - Definitions

    SAFETY GUIDELINES / DEFINITIONS This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and troubleshooting steps described within to ensure your safety and satisfaction. The contents of this instruction manual are based upon the latest product information available at the time of publication. The manufacturer reserves the right to make product changes at any time without notice.
  • Page 5: Troubleshooting

    TROUBLESHOOTING Problem Probable Cause Solution Will not turn on. 1. Power switch set at 1. Turn Power Switch to "OFF" “l” or “ll”. 2. No Power at outlet 2. Check power at 3. Cord not connected outlet. 3. Check that cord is plugged in.
  • Page 6: Important Safety Information

    IMPORTANT SAFETY INFORMATION 5. Stay alert. Watch what you are doing, and use com- cord away from heat, oil, sharp edges or moving mon sense when operating this tool. Do not use this parts. Damaged or entangled cords increase the product while tired or under the influence of drugs, risk of electric shock.
  • Page 7 IMPORTANT SAFETY INFORMATION flammable materials such as dust, wood chips, • Tools and paint scrapings become very hot. To insulation, rodent nests and other debris which avoid burns, use work gloves when scraping. could accidentally ignite. Use your heat gun for •...
  • Page 8: Operation

    OPERATION 8. Tip: Operate the heat gun in the "I" posi- NOTE Always set the heat gun upright af- tion (Cold) for two - three (2-3) minutes ter it is turned off, either for a short before switching to "OFF" position. This break or for storage.
  • Page 9: Controls And Components

    CONTROLS AND COMPONENTS 1. Three (3) Setting Power Switch 2. Power Cord OPERATION WARNING READ ALL WARNINGS IN THIS MANUAL BEFORE OPERATING THIS TOOL. USING THE HEAT GUN 1. Secure loose workpieces using a vise or NOTICE If the blower motor in the heat clamps (not included) to prevent move- gun does not turn on when the switch is ment while working.
  • Page 10 IMPORTANT SAFETY INFORMATION United States Bureau of Mines. These masks 27. Maintain power tools. Check for misalignment or and replaceable filters are readily available at binding of moving parts, breakage of parts and any major hardware stores. Be sure that the mask fits other condition that may affect the power tool’s op- properly.
  • Page 11: Grounded Tools: Tools With Three Prong Plugs

    GROUNDING WARNING: Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug.
  • Page 12: Symbol Definitions

    GROUNDING SYMBOL DEFINITIONS IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. Symbol Name Explanation Volts Voltage (Potential) Amperes...

Table of Contents