Disposing Of The Vacuum Cleaner; Wiring Diagrams - Nilfisk-Advance T75 Instruction Manual

T75
Separator cleaning and replacement (if
equipped)
1. Separator
2. Band
3. Cover
4. Screws
If there is only a dust deposit on the separator (1) allow the
dust to drop through the central hole.
The separator (1) should first be disassembled in order to be
perfectly cleaned:
■ Use the band (2) to remove the cover (3) together with
the filter.
■ Unscrew the two screws (4) and remove it from the
container.
Replace the part if it is excessively worn. Assemble the
components in the reverse order of disassembly.

Disposing of the vacuum cleaner

Dispose of the vacuum cleaner in compliance with the laws in
force.
Proper disposal (electric and electronic waste).
■
(Applicable in the European Union and in countries
providing a separate collection system)
The above symbol (Fig. 18), which is present on the product
or in its documentation, indicates that the product cannot be
disposed of together with other domestic waste at the end of
its life cycle.
To prevent damage to the environment or health caused by
improper waste disposal, please separate this product from
other waste and recycle it responsibly in order to support the
sustainable reutilisation of material resources.
This product can not be disposed of together with other
commercial waste.
GB
C360
Figure 17
[ NOTE ]
Figure 18

Wiring diagrams

Base model (Fig. 19)
Item Code
Z8 39111 + Z8 39113
H1
+ Z8 39114
Z8 39112 + Z8 39113
H2
+ Z8 39114
KM1 Z8 391005 + Z8 39731
KM2 Z8 391006
KM3 Z8 391008
KT1 Z8 39119
PA Z8 39109 + Z8 39110
PM Z8 39107 + Z8 39108
Q1 Z8 39556
Q2 Z8 39535 + Z8 39726
TR1 Z8 391051
Z8 39121
M1 Z8 39120
Z8 39244
10
Description Q.ty
White indicator 1
Red indicator 1
Contactor kW5.5
1
24VAC 1NO
Contactor kW3
1
24VAC 1NC
Contactor kW5.5
1
24VAC 1NC
Timer S/T 0-60 sec. 1
Red button 1
Green button 1
32A Main switch 1
Circuit breaker
1
14-20 A
Transformer 63VA
1
400-230/24V
Ground terminal
2
6mmq S
Terminal line
6
6 mmq S
Fuse box terminal
2
1.5mmq S
01/2015