Rapid Adjustment Of The Limits - Elektromaten TS 958 Electrical Operating Instructions

RAPID ADJUSTMENT OF THE LIMITS

When the phase rotation has been checked the Rapid limit adjustment can be made.
The final setting can be made with the fine adjustment (Control Programming page 15).
Safety limits and pre-limits are automatically adjusted.
1. Setting final limit open
Door open
press button to reach upper limit
2. Memorise the final limit open
Press stop-button for 3 sec. until
the display changes
The final limit OPEN is memorised when the door moves for at least one second
from close into the upper limit position.
3.Setting the final limit close
Door close
press button to reach lower limit
4. Memorise the final limit close
Press stop-button for 3 sec. until
the display changes
The door could be moved in DEADMAN mode UP/DOWN
Further adjustments see programming mode
The Rapid adjustment is finished
Page 11
Display
blinking
Display
changes
Display
blinking
Display
changes