Table of Contents
Advertisement
Available languages
Available languages
3.13. Data Logger
Storing Data:
The thermometer is capable of storing up to 100 data locations.
Infrared
*
To store data from an infrared reading, pull the trigger.
*
While holding the trigger, press the MODE-button until
"LOG" appears in the lower left corner of the display; a log
location number will be shown.
*
If no temperature has been recorded in the shown LOG
location, 4 dashes will appear in the lower line.
*
Aim the unit at the target area you want the record and press
the LASER/Backlight-button.
*
The recorded temperature will appear in the lower line.
To select another log location, press the ▲ and▼-buttons.
*
3.14. Recalling Data
To recall stored data after the unit shuts off, press the MODE-
button until "LOG" appears in the lower left corner. A Log
location number will be shown below LOG and the stored
temperature for that location will be display. To move to another
LOG location, press the ▲ and ▼-buttons.
-39-
Advertisement
Table of Contents
