Huawei iBattery 3.0 User Manual page 55

iBattery 3.0
User Manual
Figure 5-7 Advanced Param.
Figure 5-8 Batt. String Config
Item
Number of battery
strings
Number of iBOXs
iBOX start address
iBOX number of
iBATs
iBOX logical start addr
Current source
Batt. abnormal BCB
Issue 07 (2019-12-30)
Description
Specifies the number of battery strings connected in parallel.
The number of iBOXs connected to UPS.
Communication address of the iBOX when the UPS queries
iBOX data.
Specifies the number of iBATs managed by the iBOX.
Specifies the communication address when the northbound
device queries iBOX data. When connecting the UPS to the
network management system, do not set iBOX logical start
addr to 0 or a value same as the UPS Address.
Specifications of the Hall effect sensor used to detect iBOX
current.
If the BCB box is configured, set Batt. abnormal BCB trip to
Copyright © Huawei Technologies Co., Ltd.
5 System Commissioning
49