Table of Contents
Advertisement
3) Remove the screws from the front panel as shown in the figure below.
CAUTION: When the screws are removed from the front panel the panel will be loose. Do not let the panel fall away from the
power supply as the interconnect cables may come loose or be damaged. Hold the panel up against the power supply at all
times.
4) Hold the rack mount plate in front of the power
supply front panel and secure with the new screws
provided with the rack mount plate. Do not use
the original screws as they will be too short.
See figure right:
5) If a second power supply is to be mounted on the rack mount kit begin with Step 2 above. If a blank panel is to be mounted
in place of a second power supply use provided panel and screws. See figure below.
38
Advertisement
Table of Contents
