XP PLS600 Series User Manual page 14

7.2.2 Mode
See Appendix A for analog control setup, Appendix B for USB control setup, and the PLS600 USB-Analog Programming Manual
for information on serial command syntax and on LXI usage.
7.2.2.1 USB/Analog
The Mode menu allows the user to choose between local control or remote control. If remote control is chosen the user can
further select if the control is to be analog voltage control or USB control. The Mode screen shown below is the entry point for
these choices..
Rotating either rotary control clockwise will show the following screens:
When the desired mode is displayed press the output on/off button to select it. If LOCAL or REMOTE is selected, no further
setup is required and the display will return to the setup main menu.
If REMOTE is selected the front panel will be locked out and control will be through the Ethernet port, USB port or analog inputs
exclusively.
14
System set up
mode
mode
local
Mode
remote
Mode
Analog voltage
Mode
Analog current
Mode
Analog dual