Table of Contents
Advertisement
Now, using the Voltage control, adjust the output until the external volt meter reads exactly the voltage displayed on the power
supply display. Note that the voltage displayed on the screen will vary depending on the power supply model.
When the two voltages match exactly, press the output on/off button and the following screen will appear:
Again, using the Voltage control, adjust the output until the external volt meter reads exactly the voltage displayed on the power
supply display. Note that the voltage displayed on the screen will vary depending on the power supply model.
When the two voltages match exactly, press the output on/off button and the following screen will appear:
Now a current shunt must be connected across the output and a voltage meter connected to the shunt. Use the figure below for
guidance.
Current Shunt
29
Advertisement
Table of Contents
