Asus E394S-IM-AA User Manual page 64

NOTE: The following item appears only when Console Redirection is
set to [Enabled].
Console Redirection Settings
This item becomes configurable only when you enable the Console
Redirection item. The settings specify how the host computer and the
remote computer (which the user is using) will exchange data. Both
computers should have the same or compatible settings.
Terminal Type
Allows you to set the terminal type.
[VT100]
[VT100+]
[VT-UTF8]
bytes.
[ANSI]
Bits per second
Selects serial port transmission speed. The speed must be matched on
the other side. Long or noisy lines may require lower speeds.
Configuration options: [9600] [19200] [38400] [57600] [115200]
Data Bits
Configuration options: [7] [8]
Parity
A parity bit can be sent with the data bits to detect some transmission
errors. [Mark] and [Space] parity do not allow for error detection.
[None]
[Even]
[Odd]
[Mark]
[Space]
64 Single Board Computer
ASCII char set.
Extends VT100 to support color, function keys, etc.
Uses UTF8 encoding to map Unicode chars onto 1 or more
Extended ASCII char set.
None.
parity bit is 0 if the num of 1's in the data bits is even.
parity bit is 0 if num of 1's in the data bits is odd.
parity bit is always 1.
parity bit is always 0.