IMPORTANT!
•
E nsure that your hands are dry before proceeding with the rest
of the installation process. Before installing any of the features in
this guide, use a grounded wrist strap or touch a safely grounded
object or metal object to avoid damaging them due to static
electricity.
•
T urn off the power of your Single Board Computer, and allow it to
cool for at least 10 minutes before performing any installation/
uninstallation process.
NOTE: The illustrations in this section are for reference only. The slots
may vary depending on model.
3.1
Installing memory modules
Your motherboard comes with a SO-DIMM memory slot that allow you to
install a DDR3L SO-DIMM.
Align and insert the memory module into the slot (A) and press it down (B)
until it is securely seated in place.
40
Single Board Computer