Adding And Erasing Channels Manually; Adjusting The Tilt Correction Feature; Changing Channels - Toshiba 32AFX62 Owner's Manual

Adding and erasing channels manually

After you have programmed the channels automatically, you can
manually add or erase specific channels.
To manually add or erase channels:
1. Select the channel you want to add or erase. If you are adding a
channel, you must select the channel using the Channel Number
buttons.
2. Press MENU, and then press x or • until the SET UP menu
appears.
3. Press y or z to highlight ADD/ERASE.
SET UP
LANGUAGE ENGL SH
CLOCK SET
ANT 1 / 2 ANT1
TV / CABLE CABLE
CH PROGRAM
ADD / ERASE ADD / ERASE
+ 0
T I LT CORRECT ON I
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
4. Press x or • to select ADD or ERASE, depending on the
function you want to perform.
5. Repeat steps 1–4 for other channels you want to add or erase.

Adjusting the tilt correction feature

When you install the TV or change the direction of the TV, the
picture may become tilted because of the earth's magnetic field. If this
happens, make the following adjustment.
To adjust the tilt correction:
1. Press MENU, and then press x or • until the SET UP menu
appears.
2. Press y or z to highlight TILT CORRECTION.
3. Press x or • to correct the picture tilt between +10 and –10.
SET UP
LANGUAGE ENGL SH
CLOCK SET
ANT 1 / 2 ANT1
TV / CABLE CABLE
CH PROGRAM
ADD / ERASE ADD
+ 7
T I LT CORRECT ON I

Changing channels

To change to the next programmed channel:
Press Channel y or z on the TV or remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100).
For channels 100 and higher, press the 100 button and then the
next two numbers. For example, to select channel 125, press
100–2–5.
24
I
I
DEMO MENU TV/VIDEO VOLUME CHANNEL
x •zy
MENU
Channel zy
Channel
Numbers
MENU
yzx •
Channel yz