Adding And Erasing Channels Manually; Changing Channels - Toshiba 36A61 Owner's Manual

6. Press or to start automatic channel programming ("CH
x •
PROGRAM" displays on-screen). The TV automatically cycles
through every TV or cable channel (depending on which you
selected), and stores all active channels in the TV's memory.
7. When automatic channel programming is complete, the message
"CH Programming Completed" appears.
8. Press CHANNEL LM to view the programmed channels.

Adding and erasing channels manually

After you have automatically programmed the channels into the TV's
memory, you can manually add and erase individual channels.
To add a channel to or erase a channel from the TV's memory:
1. Tune the TV to the channel you want to add or erase. If you are
adding a channel, you will need to use the CHANNEL
NUMBERS to select the channel.
2. Press MENU.
3. Press or to highlight the SET UP menu.
x •
4. Press or to highlight ADD/ERASE.
y z
SET UP
LANGUAGE:
[ENGLISH] FRANCAIS ESPANOL
ANT1/2: [ANT1] ANT2
TV/CABLE: [TV] CABLE
CH PROGRAM
ADD/ERASE: [ADD] ERASE
MORE
MOVE [ ] SELECT [ ]
5. Press or to highlight ADD or ERASE, whichever function
x •
you want to perform.
6. Press MENU.
7. Repeat steps 1–6 for other channels you want to add or erase,
or press EXIT to return to normal TV viewing.

Changing channels

To change to the next programmed channel:
Press CHANNEL .
y z
To change to a specific channel (programmed or unprogrammed):
Press the CHANNEL NUMBERS (0–9 and 100).
Note: For channels 100 and higher, press the 100 button, and
then the next two channel numbers (for example, to select
channel 100, press 100, 0, 0; to select channel 125, press
100, 2, 5).
MENU TV / VIDEO
MENU
LIGHT
TV
CABLE
MUTE TV/VIDEO TIMER
VCR
1 2
4 5
7 8
100 0
ADV/
PIP CH
FAV
ENTER
ADV/
PIP CH
18
CHANNEL y z
VOLUME CHANNEL POWER
y z x •
RECALL POWER
3
CH CH (Channel)
6
Channel
Numbers
9
VOL
CH RTN
ENT
MENU
FAV
EXIT