Using The Locks Menu; Entering The Pin Code; If You Cannot Remember Your Pin Code - Toshiba 32AFX62 Owner's Manual

Using the LOCKS menu

The LOCKS menu includes the V-Chip, CH Lock, Video Lock, and
New PIN Code functions. You can use these functions after entering
the correct PIN code.

Entering the PIN code

1. Press MENU, and then press x or • until the LOCKS menu
appears.
LOCKS
V CH I P –
ENABLE BLOCK I NG OFF
TV RAT I NG
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
V I DEO LOCK OFF
NEW P I N CODE
2. Press y or z to display the PIN code entering mode:
• BLOCKING RESET status:
Press the Channel Number
buttons (0–9) to store a new
4-digit PIN code, and then press
ENTER.
• BLOCKING ACTIVE status
(when the PIN code is already
stored):
Press the Channel Number
buttons (0–9) to enter the
4-digit PIN code you previously
stored, and then press ENTER.
If the wrong PIN code is entered, the message "Incorrect" will
appear. Enter the code again.
3. When the PIN code is entered, the LOCKS menu opens.
LOCKS
V CH I P –
ENABLE BLOCK I NG
OFF
TV RAT I NG
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
V I DEO LOCK OFF
NEW P I N CODE
Continue to set each item following the steps on the next page.

If you cannot remember your PIN code

While the PIN code entering screen is displayed, press RECALL four
times within 5 seconds. The PIN code you stored will be released
(returned to BLOCKING RESET status).
LOCKS
BLOCK NG RESET I
P I N CODE 1 1 1 0
LOCKS
BLOCK NG I ACTIVE
P I N CODE 1 2 3 4
Note:
The V-Chip function is only available for the
U.S. V-Chip system. The Canadian V-Chip
system (Puce-V) is not supported.
Channel
Numbers
MENU/
ENTER
yzx •
RECALL
31