Programming Channels Into The Channel Memory; Programming Channels Automatically; Adding And Erasing Channels Manually - Toshiba 32HF73 36HF73 Owner's Manual

Programming channels into the channel memory

When you press Channel y or z on the TV or remote control, your
will stop only on the channels stored in the TV's channel memory.
Follow the steps below and on the next page to program all active
channels into the channel memory.

Programming channels automatically

Your TV can automatically detect all active channels in your area and
store them in the channel memory. After the channels are stored
automatically, you can manually add or erase individual channels (see
"Adding and erasing channels manually," below).
To program channels automatically:
1. Press MENU, and then press x or • until the SET UP menu
appears.
2. Press y or z until TV/CABLE is highlighted.
3. Press x or • to highlight either TV or CABLE, depending on
which you use. If you use an antenna, highlight TV; if you use
cable, highlight CABLE.
SET UP
LANGUAGE ENGL SH I
- - : - -
CLOCK SET
ANT 1 / 2 ANT1
TV / CABLE TV / CABLE
CH PROGRAM
ADD / ERASE ADD
T I L T CORRECT I ON 0
Q U I C K CONNECT GU I DE
4. Press z to select CH PROGRAM.
SET UP
LANGUAGE ENGL SH I
- - : - -
CLOCK SET
ANT 1 / 2 ANT1
TV / CABLE CABLE
CH PROGRAM
ADD / ERASE ADD
0
T I L T CORRECT I ON
Q U I C K CONNECT GU I DE
5. Press x or • to start channel programming. The TV will
automatically cycle through all the TV or Cable channels
(depending on which you selected), and store all active channels
in the channel memory.
While the TV is cycling through the channels, the message
"Programming Now—Please Wait" appears.
6. When channel programming is complete, the message
"Completed" appears.
7. Press Channel y or z to view the programmed channels.

Adding and erasing channels manually

After you have programmed the channels automatically, you can
manually add or erase specific channels.
To add or erase channels:
1. Select the channel you want to add or erase. If you are adding a
channel, you must select the channel using the Channel Number
buttons.
2. Press MENU, and then press x or • until the SET UP menu
appears.
22
Note:
To tune the TV to a channel not programmed
in the channel memory, you must use the
Channel Number buttons on the remote
control.
POWER
TV / VIDEO RECALL
INFO
1 2 3
4 5 6
Channel
8 9
7
Number
+10 CHRTN
0
100 ENT
FAV
MENU
MENU
DVDMENU
yzx •
FAV
Channel yz
TV
CBL/SAT CH VOL
VCR
DVD
POP DIRECT CH MUTE SLEEP
TV/VCR PAUSE STOP PLAY
TV front panel
FREEZE SOURCE SPLIT
REW FF SKIP / SEARCH
CH SCAN SWAP POP CH
REC
LIGHT
DEMO MENU TV/VIDEO VOLUME CHANNEL
x •zy
MENU