Using The Surround Sound Feature; Viewing The Demonstration Mode; Understanding The Last Mode Memory Feature - Toshiba 27A60 Owner's Manual

Using the surround sound feature

The surround sound feature expands the audio listening field wider and
deeper to create exceptional sound quality from the TV's speakers. The
feature uses stereo signals from a TV broadcast or video input.
To turn on the surround sound feature:
1. Select the STEREO mode following the steps under "Selecting
stereo/SAP broadcasts" on page 29.
2. Press MENU, then press
3. Press or to highlight SURROUND.
y z
4. Press or to highlight ON.
x •
|
|
|
To turn off the surround sound feature:
Choose OFF in step 4 above.
In general, you should leave your TV set to SURROUND so it
can automatically produce surround stereo or monaural sound,
depending on the broadcast type.

Viewing the demonstration mode

The demonstration mode (DEMO) is an option available on the
SET UP menu. If you select this mode, the TV will demonstrate
several of the TV's features.
To stop the demonstration mode:
Select DEMO STOP in the SET UP menu, or press the
RECALL, EXIT, or POWER buttons.

Understanding the last mode memory feature

If the power is cut off while you are viewing the TV and the power
is resupplied, the last mode memory feature will turn the TV on
automatically.
If the power is going to be off for a long time or you are going to be
away from home for a long time, remove the power plug from the wall
outlet to prevent the TV from turning on in your absence.
or until the AUDIO menu appears.
x •
31