Video Lock - Toshiba 27A60 Owner's Manual

7. Repeat steps 1 through 7 to block other channels. When you are
finished blocking channels, press EXIT to return to normal
viewing.
If you try to display a blocked channel, the TV will not display it, but
will display the nearest unblocked channel.
To unblock channels:
1. Press MENU, then press
2. Press or to highlight V-CHIP and then press
y z
display the V-CHIP menu.
3. Use the Channel Number buttons (0-9) to enter your PIN code.
If you are accessing the V-Chip menus for the first time, choose a
four-digit number to be your PIN code. Wait 2 seconds for the
BLOCKING menu to appear.
4. Press or to highlight BLOCK CHANNEL and then press
y z
or to display the BLOCK CHANNEL menu.
x •
5. Press or to highlight CLEAR and clear all channels from the
x •
list of blocked channels. Press
6. Press EXIT to return to normal viewing.

Video Lock

Video locks allow the user to lock out the input sources (Video 1,
Video 2, ColorStream) and channels 3 and 4.
The possible options are listed below:
Video: This option blocks out Video 1, Video 2 and ColorStream
Video+: This option blocks out Video 1, Video 2, ColorStream,
channels 3 and 4
Off: Disables the video lock feature
Note: In normal TV viewing, if you cannot access the input
sources (Video 1, Video 2, Video 3, ColorStream, Channel
3 or 4) please check that this feature has been disabled.
To setup the video lock, follow the steps below:
1. Press the MENU button. Press
2. Press or to select the "V-Chip Control" menu item.
y z
3. Press or to activate the menu. At the prompt, enter the
x •
correct pin code number to access the V-Chip control menu. See
the section on "V-Chip control" on steps for entering the pin
code number. (pag e16)
4. If the correct pin code has been entered, press
menu item "Video Lock."
or to highlight the SET UP menu.
x •
or
x
or .
y z
or to select SETUP.
x •
or
y z
21
Note:
After programming BLOCK CHANNEL,
change channels before turning off the
television.
to
•
RECALL MUTE
2
1
4 5
7 8
100
0
CH
MENU/
VOL
ENTER
CH
TV
to select the
CABLE
VCR
EXIT
POWER
3
6
Channel
9
Number
CH RTN
ENT
Menu/Enter
VOL
Exit