Setting Up Your Tv; Changing The On-Screen Display Language; Selecting The Antenna Input; Using The Ant/Video Button - Toshiba CZ36V61 Owner's Manual

Setting up your TV
After you've installed the batteries and programmed the remote
control, you need to set some preferences on the TV using the menu.
You can access the menu with the buttons on your TV or by using the
remote control.
• When you make a menu selection, your changes occur immediately;
Youdo rtot have to press MENU or EX!T to see your changes,
• After fifteen seconds, the menu screen will automatically disappearif
yon do not make a selection. Your changes will still be saved.
• When you are finished programming the menus, pressEXI'E
Changing the on-screen display language
You can choose from three different languages (English, French and
Spanish) for the on-screen displays. Adjustment menus and messages
will appear in the language of your choice.
To select a language:
1. Press MENU, then pres_ • or • until the SET UP menu appears.
1
2. Press • or • to highlight LANGUAGE.
3. Press • or • to highlight your desired language.
Selecting the antenna input
You can connect to two different signal sources by choosing the
antenna input (ANT 1 or ANT 2).
To select the antenna input:
1. Press MENU, then use • or • to highlight the SET UP menu.
2. Press •or• to highlight ANT 1/2.
enu I
• • ,&
Enter
Menu/Enter
TA •1_
Exit
3. Press < or • to highlight either ANT 1 or ANT 2, depending
on
the antenna terminal you wish to use.
Using the ANT/VIDEO button
You can monitor or change the signal source that is connected to the TV.
By pressing the ANT/VIDEO button on your TV, you can select the
VIDEO 1, VIDEO 2, ColorStream, ANT 1 or ANT 2 mode. The signal
source you are currently connected to will be displayed in purple.
12