Quick.start.guide.(Network.installation) - Pro Refrigeration TS110 Manual

2 | Pro Refrigeration, Inc
TS110 QUICK START GUIDE
(Network Installation)
The quick start guide is designed to be used in con-
junction with a TS110 Touch Screen Display that was
factory installed on a Pro Refrigeration, Inc Chiller
System. As such, this guide assumes that all program-
ming and non-network related wiring is complete. If
you have purchased the TS110 display to add to an
existing Chiller System please refer to section 3 for in-
stalling and wiring your RGX TS110 display. The login
information to gain access to your systems operating
parameters from the login screen is provided below.
Passwords Security Level
1111 View Only
2222 View & Control
3333 View, Control & Configure
STEP 1 - Connect Ethernet Cable
Connect an Ethernet cable from the Ethernet port on
the back of your TS110 display to an open port on your
network switch or router.
STEP 2 - Set IP Address
To allow the TS110 display to communicate with your
network you will need to give it an available IP address
on your network. To set the IP address follow the steps
and pictures outlined below.
Tap on the "Help" drop down menu and tap
"Toggle Screen Size", as seen in the picture below.
Tap on the Windows Start button, tap "Settings" and tap
"Network and Dial-up Connections".
Tap and hold on the "SMSC91181" adapter, on the menu
move your finger down to "Properties" remove your finger
from the screen to select.
Tap the "Specify an IP address" button, tap in each field
below and set them to your desired IP address and network
settings using the on screen keyboard. You may need to move
the keyboard (tap & drag) to enter values in the lower fields.
Tap "OK" when finished.