Table of Contents
Advertisement
TS110 HARDWARE OVERVIEW
LAN: The Ethernet port on the
TS110 allows you to connect the
RGX communications gateway to
your existing computer network
giving you the ability to access the
TS110 remotely with VNC software.
Please see the Quick Start section for
information on setting the TS110's
IP address.
COM3: The COM3 9-PIN serial
port is used for RS485 communica-
tion with the CR110 or RGX. Refer
to the installation section for wiring
instructions.
Compact Flash: This compart-
ment holds a compact flash stor-
age card which contains all of the
Pro Interface software, log files, &
INF files. The Storage Card can
be accessed by typing "\Storage
Card" into the run dialog.
Power Switch: Verify that the
power switch is in the ON position
prior to operation.
Quick Start Guide |
USB Port: When USB device is
inserted it will appear on TS110
as "USB Hard Disk" it can be
accessed by typing "\USB Hard
Disk" into the run dialog.
24V Power Terminal: This terminal
should be connected to a 24V AC
or DC power source.
1
Advertisement
Table of Contents
