Watching video input
You can use the TV/VIDEO button on the remote to view a signal
coming from other devices, such as VCRs or video disc players that
may be connected to your TV. (See "Connecting your TV" on page 4.)
Selecting the ColorStream mode
You can use either the ColorStream input for connecting the DVD or
1. Press MENU, then press
the OPTION menu appears.
to highlight DVD or
DTV depending on which device is
Displaying on-screen information
Press RECALL to display the following
• Channel number or VIDEO mode
• Channel label (if preset)
• Stereo or SAP (second audio program)
Setting the sleep timer
You can set the TV so it turns off automatically.
To set the sleep timer:
Press the SLEEP button on the remote control. The clock will count
down 10 minutes for each press of the SLEEP button (120, 110, ...10,
0). After the sleep time is programmed, the display will appear briefly
every ten minutes to remind you that the sleep timer is operating.
To confirm the sleep timer setting:
Press the SLEEP button and the remaining time will be momen-
To cancel the sleep timer:
Press the SLEEP button repeatedly until the display turns to 0.
Using the closed caption feature
You have two options with the closed caption feature: captions or text.
A caption is a printed version of the dialogue, narration and/or sound
effects of a TV program. Text is information not related to the program
that appears on half of the TV screen.
To view captions or text:
1. Select the desired program. The captioned programs are usually
marked in your local TV listing by "CC".
2. Press CAP/TEXT repeatedly to select caption or text mode.
3. Press 1/2 to select caption or text channel.
4. To turn off the closed-captioned feature, press CAP/TEXT
repeatedly until the normal TV viewing appears on the screen.
PICTURE AUDIO SET UP
( TV )
To select the input mode:
Press the TV/VIDEO button repeatedly to
select desired mode. The signal source you
are connected to is displayed in light blue.
The factory settings are DVD.
A closed caption signal may not be decoded
in the following situations:
• when a video tape has been dubbed
• when the signal reception is weak
• when the signal reception is non-standard
When you choose a closed captioned channel
and the text mode, the text screen always
appears. When there is no signal, however,
the text screen will not display text characters.