CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user's authority to operate this equipment.
13. LIGHTNING To protect your unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.
Congratulations! You have purchased one of the finest color TVs on the market. The goal of this manual is to guide you through setting up and operating your Toshiba TV as quickly as possible. Please make sure you’ve received the following items: TV, remote control, batteries, manual, registration card, and extended service plan literature.
Connecting your TV ... 4 Connecting a VCR ... 4 Connecting a cable converter box ... 5 Connecting a DVD/satellite receiver and a VCR ... 6 Connecting a DVD with ColorStream Connecting two VCRs ... 7 Connecting a camcorder ... 7 Connecting an audio amplifier ...
Connecting your TV If you haven’t connected electronic equipment before, or you have been frustrated in the past, you may wish to read this section. (Cables are not supplied.) • A coaxial cable is the standard cable that comes in from your antenna or cable converter box.
Connecting a cable converter box This television has an extended tuning range and can tune most cable channels without using a cable company supplied converter box. Some cable companies offer "premium pay channels" in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.
DVD or TV programs. You can record from one source and watch a program from another source. Your TV is capable of using ColorStream (component video). Connecting your TV to a ColorStream compatible DVD, such as a Toshiba DVD, can greatly enhance picture quality and performance. DVD Player with ColorStream™...
Connecting two VCRs This connection allows you to record from one VCR to another VCR while watching a video program. You will also be able to record from one TV channel while watching another channel. Stereo VCR / Playback To antenna IN from ANT OUT to TV CH 3...
With the remote control, you can operate your TV, most VCR models, and cable TV converters together, even if they are different brands. If you will be using your TV with a Toshiba VCR, your remote control is already programmed and ready to use. If you own different brands of VCRs and/or converters, you first have to program your remote control.
VCR or a cable TV converter This remote control is pre-programmed to operate Toshiba VCRs. To use VCRs or cable converters other than Toshiba models, you must follow the steps below before you operate your remote control. 1. Press the CODE button and the VCR or the CABLE button you want to register at the same time.
Learning about the remote control POWER turns the TV on and off (page 8) Sleep timer sets the TV to go off at a set time (page 21) TV/Video selects video input source (page 21) Channel + / – cycles through programmed channels (page 12) TV/VCR/Cable switches between TV, VCR and Cable (page 9) Channel Numbers...
Setting up your TV After you’ve installed the batteries and programmed the remote control, you need to set some preferences on the TV using the menu. You can access the menu with the buttons on the remote control. • When you make a menu selection, your changes occur immedi- ately.
Adding channels to the TV’s memory Your TV will stop on specific channels that are stored in the TV’s channel memory when you press Channel + or –. Use the steps below to set all active channels in your area automatically. Programming channels automatically Your TV can automatically detect all active channels and store them in its memory.
Using the TV’s features Adjusting the channel settings Switching between two channels You can switch between two channels without entering an actual channel number each time. To switch between two channels: 1. Select the first channel you want to view. 2.
To clear your favorite channels: 1. Select a channel you want to clear. 2. Press MENU, then press to display the OPTION menu. 3. Press L or M to highlight FAVORITE CH. 4. Press to display the FAVORITE CH menu. SET/CLEAR will be highlighted.
3. Press to display the V-CHIP menu. PICTURE AUDIO SET UP OPTION V-CHIP BLOCKING RESET PIN CODE SELECT ENTER [0-9] EXIT 4. Use the Channel Number buttons (0-9) to enter your PIN code. If you are accessing the V-Chip menus for the first time, select a four-digit number to be your PIN code.
MPAA Ratings For adults only. NC17 Not intended for anyone 17 or under. Restricted. Under 17 requires an accompanying parent or adult guardian. PG13 Parents strongly cautioned. Some material may be inappropriate for children under 13. Parental guidance suggested. Some material may not be appropriate for children.
To use the V-Chip to block programs by rating: 1. Press MENU, then press to display the OPTION menu. 2. Press L or M to highlight V-CHIP. 3. Press to display the V-CHIP menu. 4. Use the Channel Number buttons (0-9) to enter your PIN code. If you are accessing the V-Chip menus for the first time, select a four-digit number to be your PIN code.
Blocking unrated movies or programs Some movies and programs are not rated. You can block these movies and programs using the V-Chip. To block unrated movies or programs: 1. Press MENU, then press to display the OPTION menu. 2. Press L or M to highlight V-CHIP. 3.
8. Repeat steps 1 through 7 to block other channels. When you are finished blocking channels, press EXIT to return to normal viewing. If you try to display a blocked channel, the TV will not display it, but will display the nearest unblocked channel. To unblock channels: 1.
7. Assign the label to the channel. Press in the first space. Press the button repeatedly until the character you want appears on the screen. Press ENTER. PICTURE AUDIO SET UP OPTION CH LABEL : CH 12 SET/CLEAR LABEL SELECT ENTER EXIT 8.
Watching video input You can use the TV/VIDEO button on the remote to view a signal coming from other devices, such as VCRs or video disc players that may be connected to your TV. (See “Connecting your TV” on page 4.) Selecting the ColorStream mode You can use the ColorStream input for connecting the DVD or DTV receiver.
Adjusting the sound Muting the sound Press MUTE to temporarily turn off the sound. While the sound is off, the screen will display the word MUTE in the lower right-hand corner. To restore the sound, press MUTE again. Selecting stereo/SAP broadcasts You can enjoy watching TV while you listen to high-fidelity stereo sound with the Multi-channel TV Sound (MTS) feature.
Adjusting the sound quality You can change the sound quality of your TV by adjusting the bass, treble, and balance. To adjust the sound quality: 1. Press MENU, then press until the AUDIO menu appears. PICTURE AUDIO SET UP OPTION BASS TREBLE BALANCE...
Watching picture-in-picture (PIP) The picture-in-picture (PIP) feature allows you to watch two pictures at the same time. The smaller picture can be a TV broadcast or come from an external source, such as a VCR. To select a PIP source: 1.
Changing the position of the small picture Press LOCATE repeatedly while you are watching a small picture. The display position of the small picture will change in the following order: Freezing the small picture Press STILL while you are watching a small picture. The small picture will become a still picture.
Appendix Cleaning and care WARNING: TV sets use high voltage. Do not try to remove the cabinet back. Refer servicing to qualified service technicians. To clean the TV screen: 1. Unplug the TV to avoid possible shock hazard. 2. Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water to clean the TV screen and trim.
If after following alI of the operating instructions in this manual and checking the section “Troubleshooting,” you find that service is needed; • Visit our web site: www.toshiba.com/tacp or call the TACP toll free number 1-800-631-3811 to find the nearest Toshiba Authorized Service Station after you find a defective product or part.
In the Continental U.S. If your TV requires service, visit our web site: www.toshiba.com/tacp or call us toll-free at 1-800-631-3811. www.toshiba.com/tacp In Hawaii If your TV requires service, call: (808) 591-9281 327 Kamakee Street, Honolulu, HI 96814 Limitations All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are expressly limited to the duration of the limited warranties set forth above.
Specifications Picture Tube Type 27 (676 mm diagonal) Television system NTSC standard Channel coverage VHF: 2 ~ 13 UHF: 14 ~ 69 Cable TV: 4A, A-5 ~ A-1, A-I, Power source 120V AC, 60 Hz Power consumption 125 W Audio power 2.5W + 2.5W Speaker type 2 x 3-1/2 inches (51 x 89 mm) x 2 pcs.
PRINTED IN UNITED STATES 3K10501A L 01/07 23563690...