Table of Contents
Advertisement
3-9
Installing the OCP Card
• Before installing the OCP card the left PCI-E riser assembly must be first removed, see
the Installing the PCI Expansion Card section for instructions on removing the PCI-E
riser assembly.
• Use the following type of OCP 2.0 NIC: Type1, P1, P2, P3, P4
Follow these instructions to install the OCP card:
1.
Install the OCP card bracket.
2.
Secure the OCP card bracket with a screw.
3.
Align the OCP card to the connector on the system board and push in the direction of the arrow
until the OCP card sits firmly in the system.
4.
Secure the OCP card with three screws.
1
2
System Hardware Installation
4
3
- 38 -
Advertisement
Table of Contents
