Parameter
UPI Configuration
UPI General Configuration
Description
Press [Enter] to configure advanced items.
UPI Status
– Press [Enter] to view the UPI status.
Link Frequency Select
– Selects the UPI link frequency.
– Options available: 9.6GB/s, 10.4GB/s, Auto. Default setting is Auto.
SNC
– Enable/Disable Sub NUMA Cluster function.
– Options available: Disable, Enable, Auto. Default setting is Disable.
Stale AtoS
– Enable/Disable Stale A to S directory optimization.
– Options available: Disable, Enable, Auto. Default setting is Disable.
LLC dead line alloc
– Enable/Disable fill dead lines in LLC.
– Options available: Disable, Enable, Auto. Default setting is Auto.
- 78 -
BIOS Setup