Gigabyte H261-NO0 User Manual page 14

Expansion Slots Per node:
Riser Card CRSH010:
Š
Š
Riser Card CRSH011:
Š
1 x OCP mezzanine slot with PCIe Gen3 x16 bus
Total:
Š 4 x Half-length low-profile slots with PCIe x16 (Gen3 x16 bus)
Š 4 x Half-length low-profile slots with PCIe x8 (Gen3 x8 bus)
Š 4 x OCP mezzanine slots with PCIe Gen3 x16 bus
Video
Š
Š
Š
Š
Š
Storage Per node:
(H261-NO0)
Š
Š
Total:
Š
(H261-PC0) Per node:
Š
Š
Total:
Š
SAS card is required for SAS devices support
RAID
Š
(H261-NO0)
Š
Š
Š
Note:
1.
2.
(H261-PC0)
Š
1 x Half-length low-profile slot with PCIe x16 (Gen3 x16 bus)
1 x Half-length low-profile slots with PCIe x8 (Gen3 x8 bus)
Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM
Management chip on CMC board:
Integrated in Aspeed® AST2520A2-GP
6 x U.2 hot-swappable bays
Onboard SATA DOM support (PIN_7, PIN_8 or external cable)
24 x U.2 hot-swappable bays
6 x 2.5" SAS/SATA hot-swappable HDD/SSD bays
Onboard SATA DOM support (PIN_7, PIN_8 or external cable)
24 x 2.5" SAS/SATA hot-swappable HDD/SSD bays
For SATA drives:
Intel® SATA RAID 0/1/5/10
For U.2 drives:
Intel® Virtual RAID On CPU (VROC) RAID 0, 1, 10, 5
VROC module is compatible for Intel®SSD only
Default 1 PCS VROC module for one 2U 4 Nodes server syste
Intel® SATA RAID 0/1/5/10
- 14 -
m
Hardware Installation