Introduction; System Requirements; Package Contents - IBM ISA V.34 Installation Manual

Introduction

Thank you for purchasing an IBM ISA V.34 Host Processor Controlled (HPC)
Data/FAX modem.
This Installation Guide has information to assist you in installing your IBM ISA
HPC Data/Fax modem.

System Requirements

•
Intel** Pentium** based (90 MHz & above) Personal Computer with an ISA
bus expansion slot
•
DOS 6.0 or higher and Windows** 3.1X or Windows95**
Note: Set your data and fax software to hardware flow control

Package Contents

Along with this Installation Guide, the following items are included in this package:
•
IBM ISA V.34 HPC Data/FAX Modem (IBM FRU P/N 72H4191)
•
RJ-11 to RJ-11 (telephone) Cable
•
Software Program License ( in last section of this manual)
•
Diskettes for the following operating systems:
Windows** 3.1
Windows95**
As you examine these items, look for any physical damage.
Retain the shipping container in the event that you need to ship your IBM ISA
V.34 HPC Data/FAX modem.
Important: Be sure to retain your proof of purchase because it might be required to receive
warranty service. You can find information on how to get help, technical support, and warranty
service in Appendix B: Help and Service Information.
2 IBM ISA V.34 HPC Data/FAX Modem