Table of Contents
Advertisement
6.2 Factory Reset
The switch support factory reset, press "restore" button to back factory default settings,
including all configurations, IP address and management password.
6.3 Firmware Upgrading
Current system software version can be checked in this page, and new software upgrade
can be made.
6.4 Ping Test
Ping test is to check if a specified Client can be reached, the function is the same with ping
command under windows command lines. The IP addresses of switch and PC must be in
same network segment.
Picture 6.2.1 Factory Reset
Picture 6.3.1 Firmware Upgrading
Picture 6.4.1 Ping Test Configuration
Page 32 of 34
User's Guide
Advertisement
Table of Contents
