Port Aggregation - IC Realtime P2000M Series User Manual

4.2 Port Aggregation

4.2.1 Static Aggregation
Switches support 8 aggregation groups, each group contains maximum 8 ports. The
members in the same aggregation group should have same configuration for port
forwarding rate mode and VLAN distribution.
If LACP function applied for some ports, then static aggregation can't be configured.
Notice: Static aggregation can't be configured when LACP function enabled.
4.2.2 LACP Setting
When the LACP protocol is on, the aggregated devices interactively gather information
through LACP. According to the parameters and status of each device, automatically receive
and dispatch Data of matchable link aggregation. When the Aggregation is formed, switches
keep in an aggregation link status, switches automatically adjusts link aggregation or
dissolute when configuration changes.
If the port is configured as static aggregation, the dynamic LACP will be not available.
Notice: Static aggregation LACP function can't be used together.
Picture 4.2.1 Static Aggregation
Picture 4.2.2 LACP Setting
Page 20 of 34
User's Guide