Chapter 3 Basic Configuration; Ip Configuration; Account Configuration - IC Realtime P2000M Series User Manual

Full gigabit managed poe switches
Table of Contents

Advertisement

Chapter 3 Basic Configuration

3.1 IP Configuration

The above IP address configuration page can be used to configure the IP address of
device management interface "Interface Vlan 1". The default IP address, subnet mask
and gateway will be showed in the page. When revise the configuration, please press
"save" to confirm new configuration. Press "reset" to back to original configuration.
Above configuration need to be done under default "Static" state,if switch the IP address
mode to DHCP, IP address will be get dynamically. Please record the new IP address for
future login.
Notice: Don't modify the subnet mask unless exceptional case, login problem will be caused by
improper modification.

3.2 Account Configuration

Login password can be revised in this page, please remember the new password for
Picture 3.1.1 IP configuration
Picture 3.2.1 Account configuration
Page 17 of 34
User's Guide

Advertisement

Table of Contents
loading

Related Products for IC Realtime P2000M Series

This manual is also suitable for:

26g-24poe-manage18g-16poe-manage

Table of Contents